AzShooter
11-30-2020, 06:07 AM
https://i.imgur.com/DAO3OMMl.jpg
I wanted to add an extended magazine release to the Mark IV 22/45 Lite but when taking the trigger retaining spring out I broke my frame. I sent it back to Ruger for repair. Since I had a VQ Accurizing Kit installed I had to take all the parts out. Ruger will replace non factory parts with OEMs charge for the replacements and not return the upgraded parts. When talking to the Customer Service Rep she told me to just send in the frame without the OEM parts installed.
Ruger sent me a new frame complete with internals. No Charge! Great customer support.
Getting it back I wanted to put the VQ Accurizing kit back in and the Extended Magazine Release. This time it was a breeze for the release but the Accurizing Kit gave me fits.
I've done about a dozen kits in the past and normally it takes me 15 minutes install. Today it took me 4 hours. I got the kit in fast but couldn't get the gun to dry fire correctly more that 4 times. No matter what I did it just wouldn't work until someone on another web sight gave me a hint. The Trigger Spring Plunger would not work with my Tandemkross Victory Trigger.
I did two things to finally make it work. I replaced the TK trigger with the stock trigger and replaced the trigger plunger spring with the OEM as well. Voila...everything now works fine. Now I can use either frame with the Volquartsen LLV 6 inch upper when I want.
I have a new Volquartsen trigger coming soon so I can adjust the pre and overtravel for a better, lighter pull.
I wanted to add an extended magazine release to the Mark IV 22/45 Lite but when taking the trigger retaining spring out I broke my frame. I sent it back to Ruger for repair. Since I had a VQ Accurizing Kit installed I had to take all the parts out. Ruger will replace non factory parts with OEMs charge for the replacements and not return the upgraded parts. When talking to the Customer Service Rep she told me to just send in the frame without the OEM parts installed.
Ruger sent me a new frame complete with internals. No Charge! Great customer support.
Getting it back I wanted to put the VQ Accurizing kit back in and the Extended Magazine Release. This time it was a breeze for the release but the Accurizing Kit gave me fits.
I've done about a dozen kits in the past and normally it takes me 15 minutes install. Today it took me 4 hours. I got the kit in fast but couldn't get the gun to dry fire correctly more that 4 times. No matter what I did it just wouldn't work until someone on another web sight gave me a hint. The Trigger Spring Plunger would not work with my Tandemkross Victory Trigger.
I did two things to finally make it work. I replaced the TK trigger with the stock trigger and replaced the trigger plunger spring with the OEM as well. Voila...everything now works fine. Now I can use either frame with the Volquartsen LLV 6 inch upper when I want.
I have a new Volquartsen trigger coming soon so I can adjust the pre and overtravel for a better, lighter pull.