Langdon Tactical coming out with something...?

[EVP]

Mods feel free to move to General Discussion, I was not sure were to put it but figured most likely it would spawn a discussion about a firearms or whatever.


Obviously a lot of you got the email blast, but... what do y’all think. My guess 92 slide for PMO?::confused:

[Grey]

If it isn't the optic solution for the 92 then I'm not excited...

[learnerpermitted]

Based on the email and tease, if he's going to sell his own shot timer and not a RDS mounted option for the 92 im going to laugh and be upset at the same time.

[LangdonTactical]

Don't worry, you will be very happy.

[JimLob65]

Don't worry, you will be very happy.

Very intriguing.... Can't wait!!

[Hambo]

Don't worry, you will be very happy.

I know the social media hype works, it just doesn't do anything for me. Can't we just leave our CC's on file and you auto-bill us for cool shit?

[MasterBlaster]

I was gearing up to buy a 92 Elite. I wonder if I should I wait...

[SW CQB 45]

tagged for wanting to know!!!

should I start cutting into my 6280? HA!

https://i.imgur.com/IO7VUymh.jpg

[Yung]

I was watching the Walther-fest on yesterday's CCR episode and thought to myself that all I need is Ernest's Berettas. What a nice coincidence.

[buzz_knox]

Don't worry, you will be very happy.

This thread has made me stock up on Beretta mags in anticipation.

[Grey]

Don't worry, you will be very happy.

Looks like LTT just spent my money then...

[TCinVA]

Well...my interest is piqued.

[Vista461]

tagged for wanting to know!!!

should I start cutting into my 6280? HA!

https://i.imgur.com/IO7VUymh.jpg

Same here :D

57459

[Johnny Walker]

57460

[fpnunes]

I know the social media hype works, it just doesn't do anything for me. Can't we just leave our CC's on file and you auto-bill us for cool shit?

Isn't that just the whole truth of it?

[Bergeron]

I enjoy being teased, and besides, prior warning allows for proper preparation. I reeealllly want to try a Roland-Beretta.

[Sal Picante]

OMG!!! I got to play with the new Langton Elite 93R!


p/B_kV7QrHdPu

[GJM]

I see a new link on the LTT website to ten packs of Duracell 2032 batteries.

[LOKNLOD]

I see a new link on the LTT website to ten packs of Duracell 2032 batteries.

“1 Month supply of ACRO batteries”

[Yung]

VinceMcMahon.gif

[Paul D]

Me looking into Mr. Langdon's briefcase

https://media.giphy.com/media/l2YWjo0mz9WcDFiW4/giphy.gif

[beenalongtime]

I know the social media hype works, it just doesn't do anything for me.

I can't/won't register/log in to social media. Don't know if the change was Langdon Tactical, or instagram, but I can't view the pictures anymore as it brings up a log in.

With the You're not ready thing, I half expect a BUNCH of new things:
PX4 fiber optic sights from long ago
PX4 red dot sights
92 red dot solution
Langdon Tactical's take on the 92 performance (not his trigger job on one, but the different options he would have done).


My brain came up with this weird image of all the run on guns and supplies, causing his wife to tell him he needed to finish up the other stuff, rather then keep bugging her, while awaiting stock.:p

[Hambo]

I see a new link on the LTT website to ten packs of Duracell 2032 batteries.

Now there is a man who should have been a detective.

Was this https://www.langdontactical.com/px4-micro-red-dot-mounting-solution/ on the site previously?

[spinmove_]

Now there is a man who should have been a detective.

Was this https://www.langdontactical.com/px4-micro-red-dot-mounting-solution/ on the site previously?

Yes, that’s been on the site for a little while now.

[MGW]

Re-qualified with the M9 earlier this week. Likely for the last time. I commented to a friend of mine the shooting the M9 qual always gets my Beretta juices flowing again. Now, this. I'm 99.9% sure that my HVAC system needs to be complete before my wife finds any new guns in my house. But there's still that .1% chance.

[Beretta92x]

We know he's been trying red Dot tall sights for the px4 since at least March from one of his videos. Also we know 92 optic cut was out for patents. Hopefully both. Want to get the px4 optic cut but not before there are sights ready. Would like the 92 done as well, but it's such a beautiful gun that I don't know I can bring myself to have an optic put onto it.

[Bucky]

I can't/won't register/log in to social media.

Huh? Um...



:D .. I get what you mean, don’t tweet or FaceBook either, but technically forums are social media.

[JSGlock34]

I'm just convincing myself that there's a RDS in this picture...
https://scontent-iad3-1.cdninstagram.com/v/t51.2885-15/sh0.08/e35/s640x640/109501932_289341168969756_4088823167218953126_n.jp g?_nc_ht=scontent-iad3-1.cdninstagram.com&_nc_cat=100&_nc_ohc=_QQqRlHK9ogAX9vo1ag&oh=24f377ff5ecdbf7bff2e24d7b724d620&oe=5F3C28C3

[Vista461]

I'm just convincing myself that there's a RDS in this picture...
https://scontent-iad3-1.cdninstagram.com/v/t51.2885-15/sh0.08/e35/s640x640/109501932_289341168969756_4088823167218953126_n.jp g?_nc_ht=scontent-iad3-1.cdninstagram.com&_nc_cat=100&_nc_ohc=_QQqRlHK9ogAX9vo1ag&oh=24f377ff5ecdbf7bff2e24d7b724d620&oe=5F3C28C3

Me too. Hopefully behind the fog.

[CLaw]

Me too. Hopefully behind the fog.

Me as well. Waiting with credit card in hand...

[Grey]

I'm just convincing myself that there's a RDS in this picture...
https://scontent-iad3-1.cdninstagram.com/v/t51.2885-15/sh0.08/e35/s640x640/109501932_289341168969756_4088823167218953126_n.jp g?_nc_ht=scontent-iad3-1.cdninstagram.com&_nc_cat=100&_nc_ohc=_QQqRlHK9ogAX9vo1ag&oh=24f377ff5ecdbf7bff2e24d7b724d620&oe=5F3C28C3

I 100% believe there is based upon Mr. Langdon's comment earlier in the thread. He knows what this board wants... I passed up a couple other things to buy because I'm waiting on this. If it isn't a red dot ready 92 with an elegant solution I'll be a little sad inside...

[CCT125US]

Currently on vacation, with very limited connectivity. When the official announcement is made, I am kindly requesting to be tagged....

[Vista461]

I also hope that if it is a red dot solution, that an RMR or Holosun 507C with clear the hood on a Safariland 6280. 🙏🏻

[SW CQB 45]

I also hope that if it is a red dot solution, that an RMR or Holosun 507C with clear the hood on a Safariland 6280. 🙏🏻

Stretching the hood - no
Cutting and adding a section to the hood - no
Maybe retrofit a modern RDS hood - hmmmmmm

LE Reps change every couple of years, so it’s hard to make a connection.

[Austin Millbarge]

“Stealth” levers for a 92 series.

Fingers crossed, but not likely.

[Bobert1035]

https://scontent-iad3-1.cdninstagram.com/v/t51.2885-15/sh0.08/e35/s640x640/109501932_289341168969756_4088823167218953126_n.jp g?_nc_ht=scontent-iad3-1.cdninstagram.com&_nc_cat=100&_nc_ohc=_QQqRlHK9ogAX9vo1ag&oh=24f377ff5ecdbf7bff2e24d7b724d620&oe=5F3C28C3

Man, Ernest's quarantine hair has gotten really long!

;)

[Grey]

It's the 20th where are the deets?

Sent from my SM-G950U1 using Tapatalk

[Guerrero]

Man, Ernest's quarantine hair has gotten really long!

;)

And his pecs are huge!

[Grey]

It's the 20th where are the deets?

Sent from my SM-G950U1 using TapatalkDammit, I thought details were coming out on the 20th... rather than July 2020... sigh.... I'll stop hitting F5 on the LTT site now...

Sent from my SM-G950U1 using Tapatalk

[spinmove_]

It’s been July 2020 for over a month now. Or is it like July 20/2020 @ 20:20?

[TCinVA]

Their new teaser video has video footage (obscured by video effects, of course) of what sure looks to be a 92 style handgun with a RDS low-mounted on it.

[Grey]

Their new teaser video has video footage (obscured by video effects, of course) of what sure looks to be a 92 style handgun with a RDS low-mounted on it.

Just take our money already...

[Vista461]

Anyone want to buy a used kidney?
:D

[Geno]

Anyone want to buy a used kidney?
:D
How many you got for sale ?

[Vista461]

How many you got for sale ?

Hopefully I’ll only need to sell one to afford whatever is coming out. Lol.

[Geno]

Hopefully I’ll only need to sell one to afford whatever is coming out. Lol.

Your post cracked me up, I couldn't help but to comment. I'm like you and the others and hope that Ernest hurries up but I know he's as anxious to get this new roll-out going. Be safe and only sell one kidney.

[Tim92G]

Someone from Langdon Tactical posted on Instagram that it will be revealed this week, I'm getting my LTT compact ready for shipping..

[Not HighSpeed]

And I was just starting to dip my toes in wanting an elite or elite compact...feeling I might as well just jump into the deep end of this pool.

[SW CQB 45]

can you slow the video down for someone with over 57 year old eyes?

[David S.]

If it is what I hope it is. . .

57657

[Jared]

If it is what I hope it is. . .

57657

While I totally understand the meme, the 92 is pretty damn mature technology. Ernest knows the system pretty well. If there’s one combo I wouldn’t mind being an early adopter on, it’d be a Beretta that’s bad Langdons TLC.

[Grey]

While I totally understand the meme, the 92 is pretty damn mature technology. Ernest knows the system pretty well. If there’s one combo I wouldn’t mind being an early adopter on, it’d be a Beretta that’s bad Langdons TLC.

No dude, y'all take the advice and don't be an early adopter...

[David S.]

While I totally understand the meme, the 92 is pretty damn mature technology. Ernest knows the system pretty well. If there’s one combo I wouldn’t mind being an early adopter on, it’d be a Beretta that’s bad Langdons TLC.

I was an early adopter of their PX4 RDS Solution. I get it.

[Beretta92x]

I was an early adopter of their PX4 RDS Solution. I get it.

What were the issues with the early rds for the px4 offer then no bus?

[David S.]

What were the issues with the early rds for the px4 offer then no bus?

Apparently I should stick to my day job, cuz I suck at meme-ing.

I'm not aware of any known issues with the PX4 RDS. Mine's been fine.

[Beretta92x]

Apparently I should stick to my day job, cuz I suck at meme-ing.

I'm not aware of any known issues with the PX4 RDS. Mine's been fine.

Thanks was worried for a second.

[buzz_knox]

Based on Mr. Langdon’s just released video on shooting on the move, it’s an LTT with a low mount RMR. Best product reveal ever.

[TC215]

https://www.facebook.com/langdontactical/videos/318604672516669/

https://www.facebook.com/langdontactical/videos/318604672516669/

Awesome.

[claymore504]

Based on Mr. Langdon’s just released video on shooting on the move, it’s an LTT with a low mount RMR. Best product reveal ever.

I loved the grin at the end of the video! LOL Well played, Ernest!

https://i.imgur.com/bUCMGpA.jpg?1

[rd62]

Yep! Just saw it on Instagram too. Sweet!

[Hambo]

I loved the grin at the end of the video! LOL Well played, Ernest!

https://i.imgur.com/bUCMGpA.jpg?1



Wonderful. Now lets skip to the part where I send in my slide or buy a new one.

[JRV]

I take it the firing pin block has been redesigned so as to not press up into the optic body? That’s pretty neat.

[Moshjath]

Out of all the gun industry social media, Ernest and his crew have been killing it with their teases on social media and this forum leading up to releases! Can’t wait to get one...I should have saved the money that I just spent two weeks ago on a 92X Compact, I’ve already bought support equipment from LTT once in the last week, I don’t have the cash free right now for another pistol!

[LockedBreech]

Well, he wasn't overhyping it. Absolutely psyched.

[Grey]

We need to start an angry mob that pickets LTT until he releases the order form to buy this! Super excited, can't wait to get one.

[porkster]

Optic Centurion, very interesting..

Wonder how that fit with all the parts in the upper part of the slide..

[RevolverRob]

Picture this guys:

A 92X Performance converted to a Centurion with Langdon RDS and trigger job.

___

If I just blew your mind, it's because it's a fucking awesome idea. Move over STI...

[Grey]

The real question is whether LTT is going to drag out this teaser stuff all week and I can just stop hitting F5 or is it going to be tomorrow? CC is ready, just let me know when I should pay attention...

[LangdonTactical]

The real question is whether LTT is going to drag out this teaser stuff all week and I can just stop hitting F5 or is it going to be tomorrow? CC is ready, just let me know when I should pay attention...

You should start paying attention tomorrow morning.

[Grey]

You should start paying attention tomorrow morning.

You sir are a gentleman. My F5 button is getting worn out and will take a reprieve until the morrow.

[perlslacker]

You sir are a gentleman. My F5 button is getting worn out and will take a reprieve until the morrow.

You can do Ctrl-R (or Cmd-R on Mac OS) instead :-D

[RevolverRob]

You should start paying attention tomorrow morning.

So...92X Performance Compact/Centurion with Langdon RDS mount and trigger job available next week, then? :D

I look forward to seeing the solution in detail. I've held off on buying pizza guns for awhile, and now I am very tempted (and kind of glad I held out).

[RAM Engineer]

So...92X Performance Compact/Centurion with Langdon RDS mount and trigger job available next week, then? :D

I look forward to seeing the solution in detail. I've held off on buying pizza guns for awhile, and now I am very tempted (and kind of glad I held out).

And on top of all this, now I see that Jarvis is making their comp/barrel combos again...

[Grey]

And on top of all this, now I see that Jarvis is making their comp/barrel combos again...

That comp is HUGE. Single chamber plz...

[Bergeron]

The P-Fers were nestled all snug in their beds, while visions of Ro-Langdon Specials danced in their heads.

In all seriousness, I note that the KE Arms Short, Single-Port comp is 0.8" long, and should make a comped Centurion equal in length to M9-barreled gun. My 92D Centurion went to go and live with some old friends, and perhaps a replacement Centurion from LTT will eventually be in order.

[perlslacker]

And on top of all this, now I see that Jarvis is making their comp/barrel combos again...

Someone tell Spencer Keepers that I'm gonna need a holster for a...Rolando Special? Rigatoni Special? Ravioli Special?

[JSGlock34]

That comp is HUGE. Single chamber plz...

Seems to me that a 92 barrel should be easy to port with that open slide?


Someone tell Spencer Keepers that I'm gonna need a holster for a...Rolando Special? Rigatoni Special? Ravioli Special?

My kid would suggest Renetti...

[David S.]

Are those BUIS?

[Polecat]

Are those BUIS?

I think it is hook to hang from your shower rod or rear view mirror!

[Whirlwind06]

Just settling into the next few years sticking with mostly glocks. And here comes a game changer. :)

Sent from my Pixel 2 using Tapatalk

[call_me_ski]

57691

[TCinVA]

Well, now, an LTT Elite with a dot on it might be just what the doctor ordered...

[wmu12071]

57691

I assume that's Cowan? Did he release a video?

[revchuck38]

Check LTT's Instagram page, he just put up a video I can't afford. :cool:

[call_me_ski]

I think it is. Seems to be the unredacted photo he posted yesterday. I have no further information. It is a pic I found on social media and played with the brightness and contrast to be able to see a little bit more.

[Kanye Wyoming]

Based on this thread and the comments on LTT’s FB and Instagram pages, I daresay EL has discovered the cure for ED.

:D

[Bigghoss]

I hope there's an option for an ACRO.

[Lon]

I’d be all over that if it came out a few years back. Glad the 92 has finally became a viable RDS pistol.

[Paul D]

Well, now, an LTT Elite with a dot on it might be just what the doctor ordered...

Need a prescription for KickAzz? Dr. Langdon will see you now...

https://media1.tenor.com/images/8952d737850cf1ba08589fda1853444e/tenor.gif?itemid=5299180

I hope he will be able to retrofit old 92s....please Lawd....

[Grey]

Need a prescription for KickAzz? Dr. Langdon will see you now...

https://media1.tenor.com/images/8952d737850cf1ba08589fda1853444e/tenor.gif?itemid=5299180

I hope he will be able to retrofit old 92s....please Lawd....

I know that Steve Fisher is arranging to have his slide sent in to get fitted. Some video I watched about the "regular" LTTs had a phone call with Fisher and he mentioned the new dot capable slides that LTT is releasing and that he was sending his in.

[JRV]

Just hit the site this morning:

https://www.langdontactical.com/custom-gun-work-ltt-rdo-elite-optic-cut-for-your-92-slide/

[jrbway]

https://youtu.be/qwUl6OywfrU

https://www.langdontactical.com/92-elite-ltt-with-rdo-slide/

[LangdonTactical]

OK, everything is up on YouTube, and the site should be live for orders. Right now, we can sell complete guns, and we can take in your slides for modification. New slides are coming, so hopefully, we will be able to sell slides and top ends in the coming weeks. Right now, we are only going to work on Vertec style slides. So that means Vertecs, M9A3, Elite LTTs, 92X, and also 92A1/96A1. The reason for this is the CNC machines are set up and programed for that deck hight as well as the way the adaptor plates are made. We have done our best to keep the price down, but keep in mind we have to rebuild the top end on every gun, no matter how new it is. The new Firing pin, new firing pin block, new extractor pin, Modified G lever, and modified safety plunger all have to be swapped out. Not to mention we include the backup iron sights as well as screws for both RMR and Holosun dots.

If you go to the YouTube videos, you can see the full drop test we did on the gun as well to prove the slide internal parts. 6 drops onto the hammer from 6 feet onto concrete. If you think the drop test video I did years ago was sickening, just wait.

The bottom line, I am super proud of this project. This has been a long road and a huge investment on our part to make this happen. I really think it is going to be exactly what you all want.

[LangdonTactical]

I hope there's an option for an ACRO.

At this time we have only proved out the adaptor plate for the RMR/Holosun footprint. Others are coming including the ACRO.

[Bobert1035]

AWESOME!

[Grey]

Decided to go big for my first 92 and LTT.

Centurion, RDO, and Carry bevel.

LangdonTactical I probably screwed up my order since I put in my own shipping address, I didn't see something for an FFL, maybe that comes later?

SUPER EXCITED. Hoping its not really a 6-8 week wait. :D

[Kanye Wyoming]

Based on this thread and the comments on LTT’s FB and Instagram pages, I daresay EL has discovered the cure for ED.

:D
Looks like the next project will have to be focused on treatment for when it lasts more than 4 hours.

[Caballoflaco]

We have done our best to keep the price down, but keep in mind we have to rebuild the top end on every gun, no matter how new it is. The new Firing pin, new firing pin block, new extractor pin, Modified G lever, and modified safety plunger all have to be swapped out. Not to mention we include the backup iron sights as well as screws for both RMR and Holosun dots.

I saw this here before checking the website and thought you were going to be around twice what the actual price is. When compared to what some of the modular options for glocks are I think you met and exceeded your goals there. This looks awesome.

[Grey]

Had to go snag some NP3 15 rounders from LTT as well...

Now who the heck is going to have a holster to hold this thing?

[LangdonTactical]

Had to go snag some NP3 15 rounders from LTT as well...

Now who the heck is going to have a holster to hold this thing?

We have holsters already. We have a range OWB and an AIWB from JM Custom in stock and ready to ship.

Aaron Cowan says his Armadillo Concealment WML holster fits his (yes, he has had a top end for about two weeks already).

[Grey]

We have holsters already. We have a range OWB and an AIWB from JM Custom in stock and ready to ship.

Showing out of stock on the website, any chance I can get an order added to my mag order? :D

[LangdonTactical]

Showing out of stock on the website, any chance I can get an order added to my mag order? :D

That should be fixed now.

[Grey]

That should be fixed now.

Thanks, got one of each, hopefully I can combine my orders and save my $7.50 in shipping :D That's like a Chipotle burrito after a range day!

[GJM]

OK, everything is up on YouTube, and the site should be live for orders. Right now, we can sell complete guns, and we can take in your slides for modification. New slides are coming, so hopefully, we will be able to sell slides and top ends in the coming weeks. Right now, we are only going to work on Vertec style slides. So that means Vertecs, M9A3, Elite LTTs, 92X, and also 92A1/96A1. The reason for this is the CNC machines are set up and programed for that deck hight as well as the way the adaptor plates are made. We have done our best to keep the price down, but keep in mind we have to rebuild the top end on every gun, no matter how new it is. The new Firing pin, new firing pin block, new extractor pin, Modified G lever, and modified safety plunger all have to be swapped out. Not to mention we include the backup iron sights as well as screws for both RMR and Holosun dots.

If you go to the YouTube videos, you can see the full drop test we did on the gun as well to prove the slide internal parts. 6 drops onto the hammer from 6 feet onto concrete. If you think the drop test video I did years ago was sickening, just wait.

The bottom line, I am super proud of this project. This has been a long road and a huge investment on our part to make this happen. I really think it is going to be exactly what you all want.

Ernest, in one of the photographs I believe I see an SRO. Can you confirm that the plate will work for our RMR, Holosun and SRO optics?

[Steven T]

Ernest, in one of the photographs I believe I see an SRO. Can you confirm that the plate will work for our RMR, Holosun and SRO optics?

In his videos Mr Langdon shows both the SRO and Holosun in use.
Also states both will work.

[LangdonTactical]

Ernest, in one of the photographs I believe I see an SRO. Can you confirm that the plate will work for our RMR, Holosun and SRO optics?

Yes, all three will work. I have all three mounted on all the guns and have shot them quite a bit.

The SRO is my favorite so far, but it is big. The RMR is the smallest in size, but so is the window. Right now I really like the Holosun as the best compromise between the two. I have it on a Centurion and it is my go-to gun right now.

[spinmove_]

I’m assuming this works for the compact variants as well?

[Caballoflaco]

Buncha non-imbedding luddites round these parts :D



https://youtu.be/6K_c30tanyQ


https://youtu.be/72ix2xnJDms


https://youtu.be/BzADdfWjv6I


https://youtu.be/6K_c30tanyQ

[Beretta92x]

I’m assuming this works for the compact variants as well?

He said it would in a different thread as the guns are all the same on the back end.

[AdioSS]

No wonder Ernest said “that’s cute” when I told him about my RMR’d Elite II.
https://i.imgur.com/lJS0TvFm.jpg

[dcf1981]

I’m confused, I have one of the LE model M9A1’s that came with a Vertec slide that I want to send in instead of my Elite LTT but there isn’t an option. It’s a Vertec slide, so I guess I should just pick one.

[jwperry]

Figures I just sold my 92 to get more Sigs milled. [emoji24]

Sent from my Moto G (5) Plus using Tapatalk

[LangdonTactical]

I’m confused, I have one of the LE model M9A1’s that came with a Vertec slide that I want to send in instead of my Elite LTT but there isn’t an option. It’s a Vertec slide, so I guess I should just pick one.


Again, if it is a Vertec based slide, we can do it. The frame does not matter.

[LangdonTactical]

I’m assuming this works for the compact variants as well?

Yes, it will work with the Compact Slides as long as they are Vertec type. So, Elite LTT Comp and Cent, 92X Comp and Cent, Wilson Combat Cent, etc.

[EVP]

Don't worry, you will be very happy.

Indeed, this is great!



Thanks for the continued persistence in keeping the 92 development and improvement going!



I feel the LTT elite with trigger upgrade is an outstanding shooting gun. The RDO cut just enhances it even further. Well Done!

[Grey]

So tempted to order a compact or a full size that is in stock while I wait for the cent... sigh...

[Geno]

Yes, it will work with the Compact Slides as long as they are Vertec type. So, Elite LTT Comp and Cent, 92X Comp and Cent, Wilson Combat Cent, etc.

My order is placed.....slide is wiped down, packaged and headed to FedEx shortly. Trying to decide on the red dot but leaning heavy on the SRO.
Going on on the LTT Centurion......what a great platform !

[Hambo]

Again, if it is a Vertec based slide, we can do it. The frame does not matter.

Is that only because of the sights?

[Yung]

Time to switch back to the G45s while waiting, I guess. I'll also need to start doing some long-overdue homework on RMRs.

[TCinVA]

I mean, I don't *need* a Beretta 92 with a dot on it. But a gun that doesn't cut the shit out of my hands, burn the shit out of my pelvis, and comes with a trigger that doesn't induce leftism in my shooting would be a welcome change.

[LangdonTactical]

Is that only because of the sights?

No Sir.

Right now, we are only going to work on Vertec style slides. So that means Vertecs, M9A3, Elite LTTs, 92X, and also 92A1/96A1. The reason for this is the CNC machines are set up and programmed for that deck hight as well as the way the adaptor plates are made.

[Hambo]

No Sir.

Right now, we are only going to work on Vertec style slides. So that means Vertecs, M9A3, Elite LTTs, 92X, and also 92A1/96A1. The reason for this is the CNC machines are set up and programmed for that deck hight as well as the way the adaptor plates are made.

Well, there went that idea for the drawer full of 92 slides. ;) I'll just have to sent M9A3 slides.

[zeleny]

Right now, we are only going to work on Vertec style slides. So that means Vertecs, M9A3, Elite LTTs, 92X, and also 92A1/96A1. The reason for this is the CNC machines are set up and programmed for that deck hight as well as the way the adaptor plates are made.So 92X Performance is good to go?

[LangdonTactical]

So 92X Performance is good to go?

Does the 92X Performance have a Vertec slide??

[zeleny]

Does the 92X Performance have a Vertec slide??They say it’s a Vertec steel frame with the Brigadier slide.

[LangdonTactical]

Let me be more specific about the slides that we can work on. We are getting killed with questions about "can you work on this slide that I have?" all day long.

ONLY VERTEC STYLE SLIDES WITH SAFETY LEVERS.

92/92 Vertec safety slides
M9A3 Slides
Elite LTT Slides (full size and Compact/Cent)
92X slides (not the Performace as that is a Brigadier and has a different firing pin)
92A1 and 96A1 slides

This is because the CNC machine fixtures and programming as well as the adaptor plate, are set up for these slides. Other slides have a different deck height. D model and Performance slides use a different firing pin.

We hope to have stand-alone slides very soon. So if you have an older 92 of a different configuration, you can simply swap slides or top ends.

Please do not call and beg my staff to make an exception for you and or try to explain how we should do it....... Please!

[Uncle_Jed]

LangdonTactical I'm curious. How many rounds you have put through a 92 Elite LTT slide milled for the RDS so far?

And yes, the drop test video was sickening.

[Irfan]

I am more interested in the magazines that were used in the test. Are they Mac-gars' or Beretta's factory ones? Thanks.

[Jared]

And here I sit with a 92A1 that hasn’t had much love in the last few years.........

I’m super stoked about this, thanks LangdonTactical

[Duke]

Post your receipts or forever hold your peace about “if theyd only make a ...........Id buy one right away”


57731

[Caballoflaco]

Post your receipts or forever hold your peace about “if theyd only make a ...........Id buy one right away”


57731

So who are you going to send the barrel to to get it ported?

[Soxfan9]

Order placed, slide is packaged up and ready to go tomorrow...

[Duke]

So who are you going to send the barrel to to get it ported?

Magna Port still does it i think

I love that you remember my ramblings

“No comp, no dot, no thanksl”

[Welder]

So I'm assuming by your wording that the original Vertec G slide is a no-go? Because decocker levers instead of safety levers?

[Caballoflaco]

Magna Port still does it i think

I love that you remember my ramblings

“No comp, no dot, no thanksl”

I’m just sitting here thankful you’ve got the cash to beta-test that set up. Your STI kerfuffle saved me some serious cash.

I checked the magna-port website and it looks like porting shouldn’t be too expensive, especially since the slide doesn’t need to be ported on a beretta.

[Caballoflaco]

So I'm assuming by your wording that the original Vertec G slide is a no-go? Because decocker levers instead of safety levers?

ETA: ignore that last post, might have been wrong.

[Duke]

I’m just sitting here thankful you’ve got the cash to beta-test that set up. Your STI kerfuffle saved me some serious cash.

I checked the magna-port website and it looks like porting shouldn’t be too expensive, especially since the slide doesn’t need to be ported on a beretta.

Elite barrels can be had. I’ll just send them a barrel only so they don’t dick up the whole gun and Ernest’s work.


You’re welcome on the 2011 thing too. Cheebus that was an expensive trial

[45dotACP]

Elite barrels can be had. I’ll just send them a barrel only so they don’t dick up the whole gun and Ernest’s work.


You’re welcome on the 2011 thing too. Cheebus that was an expensive trialAs a 1911 fan myself and a lover of M&PS, I found they LTT92 was such a forgiving pistol to shoot. As far as accuracy, it's on par with the APEX fitted barrel with a FSS and flat trigger.

And to echo Ernest, the DA first shot is a benefit, because it's forgiving on close range targets, and not a big deal for long ones.

All to say, you'll probably love it more than a 2011

Sent from my moto g(6) using Tapatalk

[Welder]

ETA: ignore that last post, might have been wrong.

Yeah, I hate to be *that guy* but I saw earlier that the safety plunger gets modified for this job, and I know that the original G design used a different slide than the F slide, and the differences are in the general neighborhood of this modification.

The original Vertec G is pretty rare, but I've got an extra one sitting around that could go in for this work. But am somewhat convinced by the wording that it's a no-go.

[beenalongtime]

LangdonTactical

Vertec slides, understood.
Te only question I have, is more of a do you want to, not can you. (may be harder on bits)
Do you want to deal wit Stainless vertec slides?

Thanks

[Duke]

And to echo Ernest, the DA first shot is a benefit, because it's forgiving on close range targets, and not a big deal for long ones.

Sent from my moto g(6) using Tapatalk

Say word.


https://youtu.be/q38d4Ct3498

[Hambo]

We hope to have stand-alone slides very soon. So if you have an older 92 of a different configuration, you can simply swap slides or top ends.


:cool:

[LOKNLOD]

I’m not exactly in a “buy another gun” place at the moment but I’m close to talking myself over the ledge instead of off of it. :cool:

I’ve got a full size and compact. Thoughts on full size vs centurion for RDO, folks?

Hmm I guess if slide-only comes available, and centurion is available, I could run that on either frame? Is swapping slides back and forth a detriment in 92 series guns?

[Grey]

I’m not exactly in a “buy another gun” place at the moment but I’m close to talking myself over the ledge instead of off of it. :cool:

I’ve got a full size and compact. Thoughts on full size vs centurion for RDO, folks?

Hmm I guess if slide-only comes available, and centurion is available, I could run that on either frame? Is swapping slides back and forth a detriment in 92 series guns?

I recall Langdon saying that a Centurion with a Holosun optic is his go to these days.

[CLaw]

Ordered a full-size yesterday night. Was considering a Centurion, but already had two full sizes, and will probably send my training gun slide in once I get the one that I ordered yesterday in hand. I almost got the Centurion, but.... Already having to full size frames, I tried to adult and do what was logical... Maybe I can offload some Glocks I never shoot and grab one later.

Barring my some crazy unforeseen issue, I can’t see every going back...

[RAM Engineer]

A centurion slide will drop on a full or compact frame, right?

[Manbearspider]

Carry Optics here I come! Only question is do I send a full size slide to ride on my Elite, or my 92X Centurion slide because sight radius no longer matters...

[TicTacticalTimmy]

I’m not exactly in a “buy another gun” place at the moment but I’m close to talking myself over the ledge instead of off of it. :cool:

I’ve got a full size and compact. Thoughts on full size vs centurion for RDO, folks?

Hmm I guess if slide-only comes available, and centurion is available, I could run that on either frame? Is swapping slides back and forth a detriment in 92 series guns?


Interested in hearing the answer to this. My understanding is that Centurion and Compact slides/frames can be interchanged with no issue, but the full size slides only fit the full size frame.

[Welder]

My understanding is that Centurion and Compact slides/frames can be interchanged with no issue....

AFAIK, the only difference between Centurion and Compact slides is the rollmark. Years ago, on BF there was a thread about Compacts that were sold NIB with Centurion-marked slides, or vice versa. Sitting right next to me is a frankengun that's, among other things, a recent M9A1 Compact frame with a 92D Centurion slide. Works great.

[RAM Engineer]

AFAIK, the only difference between Centurion and Compact slides is the rollmark. Years ago, on BF there was a thread about Compacts that were sold NIB with Centurion-marked slides, or vice versa. Sitting right next to me is a frankengun that's, among other things, a recent M9A1 Compact frame with a 92D Centurion slide. Works great.

And is the only difference between a full-size gun and a Centurion the slide? ie, can you put a Compact slide on a full-size frame and have a do-it-yourself Centurion?

[Yung]

I believe this was asked before in the LTT 92 Compact/Centurion release thread, and the answer was no, referenced with a link to an FAQ on Beretta forums.

https://pistol-forum.com/showthread.php?38884-LTT-Centurion-and-Compact-92s&p=940827&viewfull=1#post940827

[Welder]

Yeah, I'm less clear on the frame differences between the Centurion and full-size, but pretty sure if you put a full-size slide on a Centurion you'll have an air gap at the front end between the end of the dustcover and the beginning of the lower part of the slide. IOW, pretty sure the dustcover is shorter length on a Centurion / Compact frame.

ETA I'm not saying it won't physically function; I don't know the answer to that. It might work just fine while looking bad.

[RAM Engineer]

I believe this was asked before in the LTT 92 Compact/Centurion release thread, and the answer was no, referenced with a link to an FAQ on Beretta forums.

https://pistol-forum.com/showthread.php?38884-LTT-Centurion-and-Compact-92s&p=940827&viewfull=1#post940827

Thanks. I was just going off the length of the dustcover (which appears to be the same), not the length of the rails (which you can't really see on photos).

[LOKNLOD]

Interested in hearing the answer to this. My understanding is that Centurion and Compact slides/frames can be interchanged with no issue, but the full size slides only fit the full size frame.

Just to sum up, it sounds like yes centurion/compact are interchangeable with one another but not with a full-size due to frame rail differences.

Perhaps think of a centurion as a compact with a long grip, rather than a full size with a short slide?

Either way, it sounds like I need to buy a whole centurion :cool:

[CLaw]

So, basically, we are all going to end up with a full size and a centurion...

Now, the real question... which dot? lol

[Mas]

I have a pre-announcement Langdon slide with SRO on my Langdon-tuned LTT, am still working with it, and am VERY happy with it so far.

It should be noted that when I got it, the SRO was already sighted in for POA/POI, and perfectly co-witnessed with the high profile iron sights.

[Tim92G]

I just placed my order to have my LTT compact slide cut for the red dot.
So now I have the option to swap the slide with my Beretta/Wilson centurion, Beretta/Wilson compact carry and my 92x compact.

[Tim92G]

Do I need to mark my slide before sending it to LTT?

[Screwball]

And is the only difference between a full-size gun and a Centurion the slide? ie, can you put a Compact slide on a full-size frame and have a do-it-yourself Centurion?

The rails are different between the two frames... but does not matter.

My Centurion slide on my Brigadier frame.

https://i.imgur.com/I0QNapI.jpg

[Amp]

https://www.youtube.com/watch?v=W3YmCVMBo6s

[Grey]

Buy a second "in-stock" 92 or just wait for 6-8 weeks... UUUGGGGHHHHH.

[revchuck38]

Buy a second "in-stock" 92 or just wait for 6-8 weeks... UUUGGGGHHHHH.

#firstworldproblems (https://pistol-forum.com/usertag.php?do=list&action=hash&hash=firstworldproblems) :)

[Grey]

#firstworldproblems (https://pistol-forum.com/usertag.php?do=list&action=hash&hash=firstworldproblems) :)

Totally is...

[Grey]

LangdonTactical So... how do we know if you still have guns in stock?

[Tim92G]

My LTT compact slide is on it's way to LTT, it will be there Monday to have red dot surgery.

[LangdonTactical]

LangdonTactical So... how do we know if you still have guns in stock?

We still have about 50 guns in stock and ready to go, those numbers are changing constantly. I think we shipped 65 guns yesterday.

[Grey]

We still have about 50 guns in stock and ready to go, those numbers are changing constantly. I think we shipped 65 guns yesterday.

Good deal... decided to get another one... sigh... DAMN YOU JOHN MCCLANE!!!

[Uncle_Jed]

We still have about 50 guns in stock and ready to go, those numbers are changing constantly. I think we shipped 65 guns yesterday.

Congratulations! That's what I'd call a very successful launch.

[gato naranja]

If I could get decent money for my handguns (this area is not handgun-centric), I believe I would sell them all to get a pair of Elite 92 LTTs. For the same with the RDO cuts, I'd consider throwing in a kidney as well.

[spinmove_]

So now that there’s a good solid way to mount a dot to a Beretta 92, which is going to carry better: a Beretta 92 Compact w/RDO or a PX4c w/RDO? Did anyone ever make proper BUIS for the PX4/PX4c?

[beenalongtime]

So now that there’s a good solid way to mount a dot to a Beretta 92, which is going to carry better: a Beretta 92 Compact w/RDO or a PX4c w/RDO? Did anyone ever make proper BUIS for the PX4/PX4c?


He is working on them. Even showed a preview in a video.
https://pistol-forum.com/showthread.php?16519-The-PX4-Compact-might-be-my-DA-SA-Glock-19&p=1033626&viewfull=1#post1033626
Post 3718
He thought they were close, but with the shutdowns, not sure if there was an issue, or just not up to production yet.

I'd prefer the dot on that, because it is my preferred gun.

[Welder]

LangdonTactical

Is the original 92G Vertec slide compatible with this work? Or does this only work with the old F-based and current universal Vertec slides?

[Jared]

He is working on them. Even showed a preview in a video.
https://pistol-forum.com/showthread.php?16519-The-PX4-Compact-might-be-my-DA-SA-Glock-19&p=1033626&viewfull=1#post1033626
Post 3718
He thought they were close, but with the shutdowns, not sure if there was an issue, or just not up to production yet.

I'd prefer the dot on that, because it is my preferred gun.

I’m thinking about dipping my toe in the red dot water with an SRO on a 92. If that goes well, an RMR on a PX4CC could well end up being my carry solution.

I’ve definitely come to prefer carrying the PX4CC to the compact 92 models myself.

[gato naranja]

I’m thinking about dipping my toe in the red dot water with an SRO on a 92. If that goes well, an RMR on a PX4CC could well end up being my carry solution.

I’ve definitely come to prefer carrying the PX4CC to the compact 92 models myself.

While I have gone on record as lusting after this latest offering in an excessive manner, I might be persuaded that the PX4 with an RDO is actually a more appropriate venue for me. Hmm.

Hmm.

[Hambo]

LangdonTactical

Is the original 92G Vertec slide compatible with this work? Or does this only work with the old F-based and current universal Vertec slides?

This is EL's response to me. I measured an old 92F slide vs. an M9A3 and the 92F was slightly shorter from the bottom of frame rails to the flat on top of the slide. However, if you look at the flats on top of each slide, the M9A3 is wider, and the shape of the slide is slightly different from a 92F (looking at it from the breech end). Comparing the two, I don't think it's a matter of programming; I don't think the concept is possible on a 92F.


No Sir.

Right now, we are only going to work on Vertec style slides. So that means Vertecs, M9A3, Elite LTTs, 92X, and also 92A1/96A1. The reason for this is the CNC machines are set up and programmed for that deck hight as well as the way the adaptor plates are made.

[David S.]

So now that there’s a good solid way to mount a dot to a Beretta 92, which is going to carry better: a Beretta 92 Compact w/RDO or a PX4c w/RDO? Did anyone ever make proper BUIS for the PX4/PX4c?

According to Beretta USA, the PX4c is a 1/4" shorter and 4oz lighter than the 92c.

My PX4c is
1.1" wide at the frame and slide.
1.2" wide Holosun 407c/507c.
1.2" wide at the old "Fugly/stealth" decocker levers levers.
1.3" wide at the low profile slide catch lever.

Beretta USA says the PX4 Compact Carry is 1.4" wide and the LTT 92 Elite Compact is 1.5" wide. (I don't know where they're measuring)

I have a PX4c with a Holosun 407c on it. It's a great little carry gun. A PX4c w/ a Holosun 507k would likely be even better, but I don't know if LTT does a 507k plate yet).

There are currently no BUIS for the PX4 line. Last I heard, Ameriglo has them on the to-do list, but COVID, etc. To quote Tom Jones regarding The Gadget: "#Soon." ;)

Comparing my RDO Solution PX4c to the RDO 92 videos, the 92 mounting solution appears more robust than the PX4 RDO solution. All else being equal, if Aaron Cowan level durability is a consideration, my impression is the 92 gets the nod in this particular criteria.

Hope this helps.

[Welder]

This is EL's response to me. I measured an old 92F slide vs. an M9A3 and the 92F was slightly shorter from the bottom of frame rails to the flat on top of the slide. However, if you look at the flats on top of each slide, the M9A3 is wider, and the shape of the slide is slightly different from a 92F (looking at it from the breech end). Comparing the two, I don't think it's a matter of programming; I don't think the concept is possible on a 92F.

Yeah, I do understand that. I guess I could have worded my question better. I'm asking about the original 92G Vertec slide specifically, and what I meant was that the 92FS (or "F style") Vertec slide has been said to be good to go for this work. We know the D slides don't work because of the internals. But the G Vertec slide hasn't had a yes or no to it yet, unless EL was meaning 'any Vertec slide with safety levers' literally, because technically the G Vertec has decockers and not safety levers.

The reason I differentiated between the F style Vertec slide and the original G style is that they're 2 different slides. When the M9A3 slide was developed, it used the Vertec F slide as a foundation, and the user-switchable G decocker that was introduced with the M9A3 allows Beretta to only make the F style slide moving forward. The new G decocker means that the original Vertec G slide (and the standard 92G slide also) has become a developmental dead end, and to my knowledge Beretta hasn't made a dedicated non-Brigadier G slide since then.

So this modification, so far, is definitely OK for any Vertec F-style slide which includes the M9A3 in both F and G configurations. We know it doesn't work on the D, we know it doesn't work on any of the standard fixed front sight slides.

Anyway, all that is to say that the Vertec G slide is kind of a unicorn and I'd like to hear a yes or no on it specifically. UNLESS my reading comprehension stinks, I haven't seen that yet. But I did go through this thread before I asked.

[Beretta92x]

According to Beretta USA, the PX4c is a 1/4" shorter and 4oz lighter than the 92c.

My PX4c is
1.1" wide at the frame and slide.
1.2" wide Holosun 407c/507c.
1.2" wide at the old "Fugly/stealth" decocker levers levers.
1.3" wide at the low profile slide catch lever.

Beretta USA says the PX4 Compact Carry is 1.4" wide and the LTT 92 Elite Compact is 1.5" wide. (I don't know where they're measuring)

I have a PX4c with a Holosun 407c on it. It's a great little carry gun. A PX4c w/ a Holosun 507k would likely be even better, but I don't know if LTT does a 507k plate yet).

There are currently no BUIS for the PX4 line. Last I heard, Ameriglo has them on the to-do list, but COVID, etc. To quote Tom Jones regarding The Gadget: "#Soon." ;)

Comparing my RDO Solution PX4c to the RDO 92 videos, the 92 mounting solution appears more robust than the PX4 RDO solution. All else being equal, if Aaron Cowan level durability is a consideration, my impression is the 92 gets the nod in this particular criteria.

Hope this helps.

I think they are attempting to go at the back up sights with a different distributor now. Hopefully one comes through, would much rather the red dot on the px4 over the 92. I brought up the 507k in an email to see if they can mill the slide so the red dot connects straight to it. Being its so short and has back up irons already on it i figured it might work with the stock front sight. They said they are always looking to improve on what they have, but no plans right now.

[spinmove_]

According to Beretta USA, the PX4c is a 1/4" shorter and 4oz lighter than the 92c.

My PX4c is
1.1" wide at the frame and slide.
1.2" wide Holosun 407c/507c.
1.2" wide at the old "Fugly/stealth" decocker levers levers.
1.3" wide at the low profile slide catch lever.

Beretta USA says the PX4 Compact Carry is 1.4" wide and the LTT 92 Elite Compact is 1.5" wide. (I don't know where they're measuring)

I have a PX4c with a Holosun 407c on it. It's a great little carry gun. A PX4c w/ a Holosun 507k would likely be even better, but I don't know if LTT does a 507k plate yet).

There are currently no BUIS for the PX4 line. Last I heard, Ameriglo has them on the to-do list, but COVID, etc. To quote Tom Jones regarding The Gadget: "#Soon." ;)

Comparing my RDO Solution PX4c to the RDO 92 videos, the 92 mounting solution appears more robust than the PX4 RDO solution. All else being equal, if Aaron Cowan level durability is a consideration, my impression is the 92 gets the nod in this particular criteria.

Hope this helps.

It does, thank you. I’m not in a position to scoop one right now, but I probably will be in a year or two. I like the recoil impulse of an aluminum frame better anywho, so even better. I’ll have to get hands on with the next compact I see in person.

[dtrice]

We still have about 50 guns in stock and ready to go, those numbers are changing constantly. I think we shipped 65 guns yesterday.

Would you happen to have any full-size LTT Elites (classic/non red-dot version) left by chance? The website says they are 1-3 weeks out. Thanks.

[Stony Lane]

Would you happen to have any full-size LTT Elites (classic/non red-dot version) left by chance? The website says they are 1-3 weeks out. Thanks.

https://grabagun.com/sale/beretta-92-elite-ltt-bl-sy-4-7-10-1.html

[David S.]

I think they are attempting to go at the back up sights with a different distributor now. Hopefully one comes through, would much rather the red dot on the px4 over the 92. I brought up the 507k in an email to see if they can mill the slide so the red dot connects straight to it. Being its so short and has back up irons already on it i figured it might work with the stock front sight. They said they are always looking to improve on what they have, but no plans right now.

Looking around various forms of social media, I don't get the impression the PX4 RDO Solution has been a strong seller. I have no insider info AT ALL, I just don't see any of them out there. I can certainly understand how it'd be tough to find a third party sight manufacturer willing to invest in such a (presumably) small market segment.

[fpnunes]

Looking around various forms of social media, I don't get the impression the PX4 RDO Solution has been a strong seller. I have no insider info AT ALL, I just don't see any of them out there. I can certainly understand how it'd be tough to find a third party sight manufacturer willing to invest in such a (presumably) small market segment.

I think you are spot on. This forum aside, the PX4 and even the 92 RDO are, at best, a boutique market entry. Are they great guns? Absolutely, and I'm sure that mine will get handed down to my son and grandson when I'm gone. When Glock released the MOS models they knew what they were doing. Cheap entry point with a huge market base. I'd hazard to say that all of the Beretta RDO guns produced in the next two years will barely scratch what the Austrian boys are producing in the current quarter.

There is little fiscal incentive to R&D and front production costs when the market share is so much smaller. That is unless you are a zealot like EL and why getting my order packages is like Christmas. :)

I am excited though to see how the 92 RDOs represent in organized competition.

[Tim92G]

I shipped my LTT 92 compact slide to LTT friday , so I've been looking at the holosun model "HE507C-GR-V2.
Anyone use this model, if so your opinion on it?
Thank you.

[gato naranja]

This forum aside, the PX4 and even the 92 RDO are, at best, a boutique market entry

I agree with the basic premise, though the 92 has one thing the PX4 never had/never will: a US military contract. Even a piddly one like the old SIGs received gave the SIGs "gravitas." Thus, the 92 and variants are at least looked at by people like my veteran son, whereas the PX4 is an oddity to them; I can see those 30-somethings checking out RDO 92s.

Probably more of them will go for the bland SIG P320 because social media-driven mass hysteria works.

[Grey]

Mags here, holsters here, just need a gun.

Sent from my SM-G950U1 using Tapatalk

[LangdonTactical]

LangdonTactical

Is the original 92G Vertec slide compatible with this work? Or does this only work with the old F-based and current universal Vertec slides?

We can do those, but it will take us a little longer as we will have to modify and refinish your safety lever rather than just replace it with the parts we have on hand.

[Grey]

When you place an order friday and wonder why isnt hasnt shipped yet... Totally not serious, super excited to see that shipping notification. Of course my FFL could be slow in sending in their license copy...

Sent from my SM-G950U1 using Tapatalk

[Welder]

We can do those, but it will take us a little longer as we will have to modify and refinish your safety lever rather than just replace it with the parts we have on hand.

Thanks. I'll let you get over the hump modifying the standard Vertecs and then I'll send mine in.

[Grey]

Anyone got theirs yet?

Sent from my SM-G950U1 using Tapatalk

[TCinVA]

Anyone got theirs yet?

Sent from my SM-G950U1 using Tapatalk

USPS says mine will be here Wed.

[Grey]

USPS says mine will be here Wed.Nice, I'll probably call LTT and make sure they have everything they need from my FFL.

Sent from my SM-G950U1 using Tapatalk

[GJM]

10 PF dollars to the first person to post a range report!

[Duke]

I have mine.


Traveling until tomorrow afternoon so can’t fiddle with it until then.

Huge kudos to Ernest for the Requested hammer spring and Stainless short trigger. Torqued and painted witness marks on the plate bolts show nice attention.

Details matter.

[GJM]

Is there a routine maintenance to this model pistol that necessitates removal of the optics plate? The Shadow 2 optics mod by CZ Custom is a pain in this regard.

[Duke]

Is there a routine maintenance to this model pistol that necessitates removal of the optics plate? The Shadow 2 optics mod by CZ Custom is a pain in this regard.

Good question. I certainly hope not

[Caballoflaco]

Is there a routine maintenance to this model pistol that necessitates removal of the optics plate? The Shadow 2 optics mod by CZ Custom is a pain in this regard.

Removing the extractor pin to remove the extractor to clean under it and also the firing pin whenever you decide to do that. But, it also looks like the optics plate retains the pin so you don’t have to re-stake the pin hole on top of the slide.

Maybe LangdonTactical can verify and offer a suggestion on the round count when that should happen.

[LangdonTactical]

Removing the extractor pin to remove the extractor to clean under it and also the firing pin whenever you decide to do that. But, it also looks like the optics plate retains the pin so you don’t have to re-stake the pin hole on top of the slide.

Maybe LangdonTactical can verify and offer a suggestion on the round count when that should happen.


I guess the question would be, what do you consider routine maintenance? If you have a habit of pouring oil in your firing pin channel and cleaning the top end with bore solvent, then yes, you're going to have to clean out the top end often. And that does include removing the plate if you want to detail disassemble the slide.

There is no reason for you to have to do that for at least 15 to 20 thousand rounds if you are taking proper care of the gun.

[Duke]

We all probably need a 20 pack of the RMR screws and to be told and retold what the Torque value is.

I’d assumed 10 inch pounds but I’m an idiot so...


58065

[Grey]

Sadness... I called last week and Aimee told me that I snagged the last Centurion in stock, called today to make sure they have my FFL (they do) and it was going to be 2-4 weeks to get it shipped out...

[Doc_Glock]

58065

Dammit.

[TCinVA]

58083

USPS exceeded expectations...for once.

The mount of the plate is solid. Each screw is witness marked very clearly.

It's good to get a gun that actually fits back in my hands again.

[Mas]

Very happy with mine so far. Testing continues.

Interesting data point. So far I've had it in the hands of four very experienced shooters including me, all familiar with carry optics. The universal comment thus far is, "This gun brings the dot to my eye faster than anything else I've worked with." (My sample has Trijicon SRO.)

Not a full range report yet, so I can't yet claim the P-F dollars offered upthread...:cool:

And, as expected with Langdon Beretta, zero malfs as yet.

[Soxfan9]

What are you guys running for a dot size? I have no experience with a red dot on a pistol. My slide is at LTT getting done so I am researching options.

[GJM]

Very happy with mine so far. Testing continues.

Interesting data point. So far I've had it in the hands of four very experienced shooters including me, all familiar with carry optics. The universal comment thus far is, "This gun brings the dot to my eye faster than anything else I've worked with." (My sample has Trijicon SRO.)

Not a full range report yet, so I can't yet claim the P-F dollars offered upthread...:cool:

And, as expected with Langdon Beretta, zero malfs as yet.

Would that be a SRO to SRO comparison, or SRO to another optic?

[Doc_Glock]

58083


The plate looks like it is mounted lower than the top of the barrel!

[Tim92G]

My slide made it to LTT this morning, the bad thing is I forgot to add signature required so I hope they received it.

[Duke]

Lasers and stuff.


58099

[Mas]

Would that be a SRO to SRO comparison, or SRO to another optic?

Other optics, on other pistols. It's going to be interesting to try to sort out how much of this factor is the Beretta, Ernest's low mounting system, and the SRO itself.

[Dmross1111]

My slide made it to LTT this morning, the bad thing is I forgot to add signature required so I hope they received it.

Did the same thing....Aimee sent me an email letting me know they got it......took about five days til she let me know

[Grey]

"Awaiting fulfillment" bleh, I dont know why I'm jonesing so bad for my order.

Sent from my SM-G950U1 using Tapatalk

[LockedBreech]

This coming out less than a month after our pay cut is the most pain I've had in 2020.

Fortunately, the old skill of saving up a few pennies at a time still works. See you eventually, sweet sweet optics 92.

[Grey]

LTT decided the twist the knife. Just got an email with an invitation to review the products I ordered. I totally could review the magazines I ordered when I get my gun... [emoji24][emoji24]

Sent from my SM-G950U1 using Tapatalk

[GJM]

Been running all day, did I miss a range report? I want to know where to have LL send the 10 PF dollars.

[Tim92G]

Did the same thing....Aimee sent me an email letting me know they got it......took about five days til she let me know
I emailed ltt a few minutes ago to verify they have my slide and got a reply less than 2 minutes later , and yes they have it.

[Grey]

Bleh, I wish I knew what guns were in stock when I ordered... I wanted an in stock gun... I know I'm just bitching and moaning over here... This week is just rough and a new toy always helps, I just want to sit and watch TV and enjoy that sweet DA trigger.

[Duke]

Bleh, I wish I knew what guns were in stock when I ordered... I wanted an in stock gun... I know I'm just bitching and moaning over here... This week is just rough and a new toy always helps, I just want to sit and watch TV and enjoy that sweet DA trigger.

58154

[revchuck38]

Duke - You're a cold mofo. :)

[Duke]

Duke - You're a cold mofo. :)

Single Action is, let’s go with okay


58155

[LockedBreech]

FRICK

[Grey]

Duke damn those are some sweet numbers!!!!

[TCinVA]

58154

Did you get the NP3 option?

I'll have to break out my scale but I suspect those are lighter numbers than on my specimen. (Not that I'm complaining...mine is more than fine and hasn't been shot yet to break it in really good)

[Duke]

Did you get the NP3 option?

I'll have to break out my scale but I suspect those are lighter numbers than on my specimen. (Not that I'm complaining...mine is more than fine and hasn't been shot yet to break it in really good)

No NP3


12lb hammer spring. Because I like to get down.....

[perlslacker]

No NP3


12lb hammer spring. Because I like to get down.....

doesn't the 12lb hammer spring come standard with the LTT TJ?

[thatguybryan]

Anyone know if LTT can re-cerakote an m9a3 in FDE? Want to send my FDE m9a3 in but not sure I want a black slide.

[LangdonTactical]

Single Action is, let’s go with okay


58155

In all fairness, we knew who the gun was going to. You have been shooting 1911s lately, so it was time to bring you back to the DA/SA side.

[LangdonTactical]

doesn't the 12lb hammer spring come standard with the LTT TJ?

No, the standard it 13 lb unless you say otherwise.

[LangdonTactical]

Anyone know if LTT can re-cerakote an m9a3 in FDE? Want to send my FDE m9a3 in but not sure I want a black slide.

Yes, we are doing some FDE slides as well. A common request, but there is an upcharge for that.

[LangdonTactical]

The plate looks like it is mounted lower than the top of the barrel!

It is below the barrel, the bottom of the RMR is in line with the top of the chamber of the gun.

Many people forget that the 92 already has very little slide material above the barrel. There is no need for a big box around the chamber to lock into the slide like most newer John Browning locking system guns.

[Grey]

Another day, another "Awaiting Fulfillment" status... I'll go cry in my corner...

[JSGlock34]

Duke - are you planning on using a Keeper with the LTT?

[Caballoflaco]

Another day, another "Awaiting Fulfillment" status... I'll go cry in my corner...

You need to get with Glenn and find out where to get some fancy cheese to go this whine.

ETA: here you go. https://pistol-forum.com/showthread.php?43373-Support-your-local-Cheese-business :D

[Grey]

You need to get with Glenn and find out where to get some fancy cheese to go this whine.

ETA: here you go. https://pistol-forum.com/showthread.php?43373-Support-your-local-Cheese-business :DWhine about guns or whine about politics... I'll pick guns...

Sent from my SM-G950U1 using Tapatalk

[Caballoflaco]

Whine about guns or whine about politics... I'll pick guns...

Sent from my SM-G950U1 using Tapatalk

You make a strong argument.

[Grey]

You make a strong argument.Either way I need some cheese [emoji1787][emoji1787]

Sent from my SM-G950U1 using Tapatalk

[thatguybryan]

Yes, we are doing some FDE slides as well. A common request, but there is an upcharge for that.

Amazing. Just what I wanted to hear! I assume it is also possible to convert my gun to a G model while it's there as an add on option?

[GJM]

Surely someone will be posting a range report.

[Duke]

Duke - are you planning on using a Keeper with the LTT?

No. He doesn’t make anything for a weapon light.

And I likes to light stuff up..

[TCinVA]

No NP3


12lb hammer spring. Because I like to get down.....

I measured mine and the numbers on my scale aren't much off of yours. Can't complain about that.

[Hieronymous]

Surely someone will be posting a range report.

Thought you guys might enjoy this.


https://youtu.be/8tPGmuHNWBY

[Grey]

Is today my lucky day?

Why doesn't GJM have one yet...?

[revchuck38]

Why doesn't GJM have one yet...?

Karma. He already has one (or more) of everything else. :)

[Grey]

Is today my lucky day?

Why doesn't GJM have one yet...?Another disappointing day from LTT... [emoji24][emoji24][emoji24][emoji24][emoji24][emoji24][emoji24][emoji24][emoji24][emoji24]

Sent from my SM-G950U1 using Tapatalk

[GJM]

Thought you guys might enjoy this.


https://youtu.be/8tPGmuHNWBY

I was thinking a review by a PF member who knows what they are doing. It is really hard to see a 92 with a cocked hammer, when it shouldn’t be.

[Tim92G]

I just placed an order for a HE407C-GR V2 Holosun 407C Reflex Sight (Green Dot) for my LTTcompact.
I should have it Monday, now if I only had my slide back I would be happy.

[Duke]

500 rounds through mine in the last 2 days.

I feel qualified to answer range report queries-

However beyond the dot aspect - it’s the same as the other perfectly tuned Elite LTTs (Which much better shooters than me have detailed in the past )

That said - If a 92 is your jam, all previous versions are simply incomplete.

58261

[CLaw]

I’ve now got a dilemma... I’ve now got my full-size NP3 RDO LTT in. I have two full-size LTTs in the safe. Do I send my current trainer slide in to get cut, or do I order a fourth... I have issues...

Anyone want a pile of Glocks and Glock holsters... lol

[Beretta92x]

I’ve now got a dilemma... I’ve now got my full-size NP3 RDO LTT in. I have two full-size LTTs in the safe. Do I send my current trainer slide in to get cut, or do I order a fourth... I have issues...

Anyone want a pile of Glocks and Glock holsters... lol


I kind of regret purchasing a px4 and then spending money turning it into a carry. Almost feel like i should have just gotten another centurion for $850 from Ernest and paid the 330 for the optic cut. Although i do find the px4 for some reason easier to shoot, it is not as smooth a gun as my 92x centurion. Not even close. I would get the optic cut for the px4, but really want to wait for the taller sights so i dont have to send the slide in twice to get done.

[Maca]

About to order a Centurion...NP3 or not?

[beenalongtime]

I was debating about one of the full size guns I have, or the compact slide, since it will fit on my Centurions, over either the LTT Centurion or the Centec (just because low serial number).
Sent them an Email, as I am thinking about the frankengun I put together:
58302

Still have the original slide, and all, which makes me think best of both worlds. Arguing with myself (a want, not a need, that I expect will change as one ages).