Do HK slim lever solve the rattle?

[Irelander]

The right slide release lever rattle on my P2000SK is starting to get to me. I've heard somewhere that the slim levers do no rattle. Is that true? If so, I'll certainly pony up for a set.

[CCT125US]

Unsure. However, I believe over on the PRO site, I read about the use of a small length of shrink tube being used. Have not tried myself, and can't vouch for the effectiveness.....

[cornstalker]

Unsure. However, I believe over on the PRO site, I read about the use of a small length of shrink tube being used. Have not tried myself, and can't vouch for the effectiveness.....

Heat shrink tubing worked for me.

[Mike C]

Same for me. Heat shrink tubing was the only fix I found. Funny how you wouldn't think you'd care about something like that but it's freaking annoying. It felt like driving a convertible down the road with the top half way down flapping in the wind.

[Irelander]

Same for me. Heat shrink tubing was the only fix I found. Funny how you wouldn't think you'd care about something like that but it's freaking annoying. It felt like driving a convertible down the road with the top half way down flapping in the wind.

I have access to shrink tubing. Just shrink a short piece around the lever?

[cornstalker]

I have access to shrink tubing. Just shrink a short piece around the lever?

It's been a while, but I recall stretching a piece over one end or the other, sliding it to the middle and shrinking it down.

[P30]

hkpro.com/forum/hk-handgun-talk/186709-p30-p2000-ambi-slide-release-rattle-fix.html#post1399192 (https://www.hkpro.com/forum/hk-handgun-talk/186709-p30-p2000-ambi-slide-release-rattle-fix.html#post1399192)

hkpro.com/forum/hk-handgun-talk/209285-solved-p2000sk-slide-release-rattle.html#post1592977 (https://www.hkpro.com/forum/hk-handgun-talk/209285-solved-p2000sk-slide-release-rattle.html#post1592977)

Haven't done this to my pistol, I've just looked it up.

[Mike C]

Irelander P30 beat me to it. That is exactly where I was going to point you, (first link). That is a great how to and what I did.

[Irelander]

Excellent! Thanks guys.