P30 - P2000 LEM trigger spring

[JodyH]

I seem to recall that the only difference between the P30 trigger spring and the P2000 trigger spring is the extended leg on the P30 spring that retains the slide stop.
Can someone verify?
I have a whole bag full of P2000 springs and the P30 is ready for a swap out.

[joshs]

You are correct, P2k springs work in the P30.

[JodyH]

I thought so, but wanted verification before I wrestled with getting that evil little spring in place.

[JodyH]

Ok... this trigger spring install went so quick and easy I thought I screwed something up.
It was literally a 1 minute job.

Nice!
:p

[EricM]

If I recall correctly the P2000 LEM trigger rebound spring leads to a pull a few ounces lighter than the P30 LEM spring. I've been running a P2000 LEM spring in my P30 for a while but it doesn't look like I wrote down the exact measurements before/after.

[JodyH]

If I recall correctly the P2000 LEM trigger rebound spring leads to a pull a few ounces lighter than the P30 LEM spring. I've been running a P2000 LEM spring in my P30 for a while but it doesn't look like I wrote down the exact measurements before/after.
The P2000 has a lighter firing pin safety spring, which does equal a slightly lighter trigger weight.
As far as I can tell the TRS are pretty much identical.
After installing the new TRS my trigger weight went up 1# or more. I guess my old spring was weaker than I thought.