1911 picture thread

[DamonL]

JAD, love the spec, but please don't paint that beauty

theJanitor I think this was a Hoag gun. Look at the grip safety. I bought this used and it had a Colt long trigger and Colt Ambi safety. I liked the way the sights are buried. I had Steve Woods install a Swenson ambi, install a short Videcki trigger, and dehorn the Bomar. Later I had a Barsto barrel installed and even later, I had it painted with Birdsong Black-T. Yes, I had it painted, but I actually like it that way. :).

16205

[theJanitor]

Looks like a hoag to me. Awesome


Sent from my iPhone using Tapatalk

[Inkwell 41]

theJanitor I think this was a Hoag gun. Look at the grip safety. I bought this used and it had a Colt long trigger and Colt Ambi safety. I liked the way the sights are buried. I had Steve Woods install a Swenson ambi, install a short Videcki trigger, and dehorn the Bomar. Later I had a Barsto barrel installed and even later, I had it painted with Birdsong Black-T. Yes, I had it painted, but I actually like it that way. :).

16205

As far as I know, no one makes a grip safety like that any more. I miss those days. Nice find, sir.

Regards.

[theJanitor]

Since Steve Woods did some of the mods, this can't be a recent find. Steve did great work DamonL

[DamonL]

Thank you Jfpatch.

theJanitor, Yes, he has not worked on guns in a while. :) I used to live in driving distance to him when he was building guns and visited him many times. You and I have similar taste in 1911's. I like dehorned commander hammers and King's safeties, too. My favorite 1911's have a basic carry package like your Garthwaite pistol but without checkering.

[StraitR]

Fit a Wilson 6BN BP "Tactical" thumb safety tonight. Not sure what makes it tactical, it's much smaller and lower profile than most. Anyway, the blueing doesn't quite match, but it's a big improvement over the Baer TS.

https://c1.staticflickr.com/5/4166/34309701281_64a11b91b9_c.jpg

[Hambo]

http://i.imgur.com/Rwt5cAB.jpg?1

I've got wood.

[45dotACP]

This gun I wanted to stay with the theme of a gun that looks mostly stock but has a little more horsepower under the hood. A few refinements that fix what I viewed as the guns shortcomings.

From Colt, the gun had a tiny thumb safety, the rear sight was shit and the gun itself was not as accurate as I wanted due to a combination of loose barrel to bushing fit and overcut lower lugs. It wouldn't group any weight bullet for shit and I got better distance accuracy from my gen 2 G19.

I had an Ed Brown thumb safety from some bygone project so that went in first. Afterwards, the replacement rear sight, a U notch from 10-8. I actually kinda like how it works with the front white dot so I think I'll hold off on sending it to be dovetailed. On a different note...that factory rear was a total bastard to get out. Tried heating it, freezing it, putting it in a vice and whaling on it with a hammer...nothing worked. I had to (Carefully) saw it in half with a Dremel cutoff wheel to remove it

And lastly (and most expensive) a replacement barrel from Ed Brown to correct the accuracy problem. Test firing was promising and the gun is far and away improved from factory. A trigger job is probably in order at some point but I'm not terribly sensitive to trigger pull and I figure a few thousand rounds is a better (and more fun) option.https://uploads.tapatalk-cdn.com/20170504/2f85c09868427103f512294ead142712.jpghttps://uploads.tapatalk-cdn.com/20170504/6dc673f767431a5169a8367c8228c464.jpghttps://uploads.tapatalk-cdn.com/20170504/afaf437b81506bcda5f7e00903d742a8.jpg

Sent from my XT1585 using Tapatalk

[StraitR]

Looks great^^^^. And I like the way you think.

[Robinson]

I really like that rear sight. I use a very similar one from John Harrison on my 1991 pistols.

[JAD]

Me too. And P35s.

[Eli]

Quick range trip after I got off work this morning.


http://i228.photobucket.com/albums/ee95/ceelfi/les%201.jpg

http://i228.photobucket.com/albums/ee95/ceelfi/les%202.jpg

http://i228.photobucket.com/albums/ee95/ceelfi/les%203.jpg

[breakingtime91]

Quick range trip after I got off work this morning.


http://i228.photobucket.com/albums/ee95/ceelfi/les%201.jpg

http://i228.photobucket.com/albums/ee95/ceelfi/les%202.jpg

http://i228.photobucket.com/albums/ee95/ceelfi/les%203.jpg

Looks like you got a few more 1911s

[Eli]

Looks like you got a few more 1911s

Yup...not real sure how it happened. Got my tax returns, and then.....1911s appeared in the safe.

[breakingtime91]

Yup...not real sure how it happened. Got my tax returns, and then.....1911s appeared in the safe.

ya, kinda sorta, happening to me. I am getting my polymer gun nailed down and my eyes are now drifting to 45 acp 1911s...

[StraitR]

ya, kinda sorta, happening to me. I am getting my polymer gun nailed down and my eyes are now drifting to 45 acp 1911s...

https://media.giphy.com/media/YHYmMLkOmqoo/giphy.gif

[Larry Sellers]

ya, kinda sorta, happening to me. I am getting my polymer gun nailed down and my eyes are now drifting to 45 acp 1911s...


This pleases me

[JHC]

https://media.giphy.com/media/YHYmMLkOmqoo/giphy.gif
ROFLMAO

[JHC]

ya, kinda sorta, happening to me. I am getting my polymer gun nailed down and my eyes are now drifting to 45 acp 1911s...
As I accuse Kevin B about 1911s, "Always an enabler, never a disabler".

[breakingtime91]

As I accuse Kevin B about 1911s, "Always an enabler, never a disabler".

It literally is StraitR and you, you two ruined me. All I can think about is a 5 inch 45 acp blaster..

[JHC]

It literally is StraitR and you, you two ruined me. All I can think about is a 5 inch 45 acp blaster..

To the question from Obi Wan Ken H: "Who here owns at least one 1911?"

Hackathorn to 16 out of 18 in my class a few years ago: "You all are patriotic Americans."

To me and another: "You two are communist faggots."

[jwperry]

Sent my NH off for an IonBond total coating, new high visibility Novak front sight and to clean up the peening on the ejector.

It shoots low now.https://uploads.tapatalk-cdn.com/20170514/b74999e275037b78b5cddf08716bf07a.jpg

Sent from my SAMSUNG-SGH-I537 using Tapatalk

[JAD]

File that under file that.

[Sensei]

A couple of PROs

16565

[Sensei]

16617

[Mack]

16639

[Sensei]

Here is a little Ed Brown action...
16643

[MGW]

https://uploads.tapatalk-cdn.com/20170520/231d497f10f9583cca2a78b190993f3c.jpg


Sent from my iPhone using Tapatalk

[CSW]

Here is a little Ed Brown action...
16643

Schwiiiiiiing!!!!

[TC215]

Here is a little Ed Brown action...
16643

Nobody does stainless like Ed Brown.

[Serpico1985]

Just finished this overhaul up for my uncle. He's a retired army vet. I just gave it back to him today, timing worked out great.

Start:
http://i67.tinypic.com/2eb500h.jpg

Final:
https://preview.ibb.co/nHYkdF/left_side_overall_2.jpg (https://ibb.co/cc7p5v)

https://preview.ibb.co/kU5sQv/right_side_close_up_front.jpg (https://ibb.co/iYLRkv)

https://preview.ibb.co/fGGMJF/ejection_port_dehorn.jpg (https://ibb.co/cZE8yF)

https://preview.ibb.co/diabkv/IMG_2604.jpg (https://ibb.co/eOt7sa)

https://preview.ibb.co/eiqLCa/IMG_2587.jpg (https://ibb.co/j7vnsa)

[JAD]

So awesome, Serp. ~The~ EDC.

[StraitR]

NICELY done Serpico. Nailed it.

[busdriver]

The Chen mainspring housing/magwell blending looks great. Tastefully understated.

[Robinson]

Nice. Do I spot some Harrison parts on that pistol?

[Serpico1985]

Thanks guys.

Roger that Robinson. The slide stop, hammer and rear sight are Harrison parts. I wanted to keep the look retro-ish which is why I went with the Harrison rear sight. My uncle has problems see plain sights well so I went with the Fiber optic front. The grip safety is the EGW .245" that gets re-shaped and the thumb safety is Ed Brown.

I will say this in reference to the Harrison slide stop. I naturally have a high hold on most guns which often interferes with the slide stop. It's never been a problem on 1911's before but with this Harrison slide stop I was preventing the slide from locking back quite a few times. I also noticed a not insignificant irritation to my support hand palm from the slide stop during firing. I adjusted my grip and all these problems went away immediately. I think the Harrison part looks amazing and for the vast majority of shooters would be a non-issue. But if you use a high support hand hold you may want to go with a more traditional profiled slide stop. Just my $0.02.

I can't say enough about the Chen maxbevel mainspring housing. It's phenomenal. I had a few different test fire sessions with this gun to work out some feeding kinks and the combination of the mainspring housing and opened up magwell was noticeable in terms of reload consistency for me. I'll never not use this part for future builds.

[theJanitor]

Again. 'cause I love it so

http://i.imgur.com/Bmf1N6l.jpg?1

[Nephrology]

Again. 'cause I love it so

http://i.imgur.com/Bmf1N6l.jpg?1

You have great taste.

[Trukinjp13]

Again. 'cause I love it so

http://i.imgur.com/Bmf1N6l.jpg?1

Perfect


Sent from my iPhone using Tapatalk

[theJanitor]

I was in a picture taking mood...

http://i.imgur.com/F6KWN8S.jpg

[DamonL]

Garthwaite is not accepting new work until the end of next year.

[theJanitor]

Damn. Did he say why? Now I have to check if my end-of-summer slot is still secure


Sent from my iPhone using Tapatalk

[StraitR]

Garthwaite is not accepting new work until the end of next year.

In April, it was the end of the summer. He really stretched it out then.


Damn. Did he say why? Now I have to check if my end-of-summer slot is still secure

Hope your spot is still solid bro. I bet it is.

[DamonL]

I think you are good if you have a commitment already.

I was told to contact him Nov. 2018 if I am interested in custom work.

[theJanitor]

http://i.imgur.com/MdacXzj.jpg?1

[Robinson]

As far as I'm concerned we can go ahead and label theJanitor as a dude with good taste in firearms.

[theJanitor]

AHAHAHA! something about finding one thing you like and sticking to it....

actually, I'm taking pics cause I want to upgrade cameras and I'm trying to get in a little practice before shopping. these are with an old 40D that must be about ten years old. Pretty happy that aside from cropping, these are pretty much straight out of the camera

http://i.imgur.com/0Obq3Xg.jpg?1

[DamonL]

I don't know who to send this to now. My go to smith use to be Novaks.

17264

[theJanitor]

I guess you're looking for an "old-school" smith. Full build?


Sent from my iPhone using Tapatalk

[41magfan]

I realize full well we've all got our own subjective notions about pistolsmiths, but I would have no problem in determining my own short list.

In no particular order ......

CT Brian
Luke Volkmann
Stan Chen
Paul Liebenberg
John Jardine

[HCM]

I realize full well we've all got our own subjective notions about pistolsmiths, but I would have no problem in determining my own short list.

In no particular order ......

CT Brian
Luke Volkmann
Stan Chen
Paul Liebenberg
John Jardine

How many of those guys are actually taking work ?

[41magfan]

How many of those guys are actually taking work ?

A quick check revealed that Brian is doing full house builds only.

Jardine is running VALTRO USA, so I suspect he's not working at a bench anymore.

The rest didn't have any notices on their sites indicating that they're not taking on work, so a call would be necessary to verify I suppose.

[Robinson]

I don't know who to send this to now. My go to smith use to be Novaks.

17264

Nice pistol. Send for what? Looks good as it is -- do you know when it was made?

[theJanitor]

I'd avoid pistol dynamics. It'll be easier to wait for garthwaite at the end of next year


Sent from my iPhone using Tapatalk

[45dotACP]

Looks pretty nice Damon. If you're comfortable wrenching on it, you can get a tenon staking tool and a 10-8 or Harrison rear. A little bit of shade tree gunsmithing is never a bad thing as long as you know what to do.

Who to send it to depends on a whether you want a full house build. I think at the termination of my largest​ student loan, I'm going to get a full house build done by Jeremy Reid. I like the dudes style...and also that he's a hardcore USPSA shooter, so he knows how to build a gun that'll hold up.

Sent from my XT1585 using Tapatalk

[DamonL]

I guess you're looking for an "old-school" smith. Full build?

Yes to both. Old school gun, old school smith. Thinking this could be a pass to the next generation gun.

[DamonL]

Nice pistol. Send for what? Looks good as it is -- do you know when it was made?

I don't know when it was made. It's an old Series 70, not a new issue one. Novaks use to have a carry package that I liked.

Sights
Beaver tail grip safety
Extended thumb safety
Lower and flair ejection port
Dehorn
Bevel mag well
Reliability package
Trigger job
Commander hammer
Refinish

I would add,

Install match barrel with solid match bushing.
Fit slide to frame
Nice double diamond wood stocks

[pistolwrench]

http://i190.photobucket.com/albums/z228/pistolwrench19/2017Palmer/R3.jpg~original

[StraitR]

Nice Chuck.

[JAD]

Man, that black on silver barrel is pretty striking.

[DamonL]

Chuck,

If you want to do that to my pistol, I would be alright with that. :) I have always admired your work.

[StraitR]

Black Walnut grips from Woodcaliber.com arrived today. Really impressed with them, extremely quick shipping, and packaging was outstanding. Highly recommended. Also tried some VZ Slex grip screws, which are hard to see here, but they're a combination of hex and slotted. Neat idea, but I think I'll grab some more traditional regular slotted screws from Wilson tonight on an order I need to finish up.

I'll have to get some better pics later.

https://c1.staticflickr.com/5/4214/34884160480_1b5ba67a7a_c.jpg

[Inkwell 41]

If you want old school, I think Karl Sokol is still taking work...
http://chestnutmountainsports.net/

[StraitR]

A quick kitchen lighting shot after installing a 10-8 rear sight last night. That thing took some serious filing. I've heard this about 10-8 sights, but never experienced it with my Glocks, M&Ps, or P30.

I normally use nylon punches and a vice, but decided to try THIS (https://smile.amazon.com/gp/product/B016R4DXJW/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=ll1&tag=pistolforum-20&linkId=49e73183b4b0e10f6de912c5fb1347a0) relatively inexpensive sight pusher from amazon, and it worked great. Very well made and easy to use. Recommended.

https://c1.staticflickr.com/5/4261/35285826715_f1e74156cb_c.jpg

[theJanitor]

http://i.imgur.com/6gKz7JP.jpg?1

[StraitR]

Swapped out the thin grip bushings that came on the TRS with a set Challis hex bushings. Very nice bushings, I'll use them again should I ever have a need. Replaced the VZ Slex screws with Wilson slotted, blued. So, this is done for now.

https://c1.staticflickr.com/5/4272/34586441773_d4de4da6c5_c.jpg

[Robinson]

Swapped out the thin grip bushings that came on the TRS with a set Challis hex bushings. Very nice bushings, I'll use them again should I ever have a need. Replaced the VZ Slex screws with Wilson slotted, blued. So, this is done for now.


Those grips, er... stocks and slotted screws look great on the pistol. You have to know you will catch hell from Tamara though.

[StraitR]

Those grips, er... stocks and slotted screws look great on the pistol. You have to know you will catch hell from Tamara though.

haha. Thanks. Yes, unfortunately they won't time without the use of O-rings, and I didn't bother hunting mine down last night after finishing the bushing swap. The first three came out pretty easily, only one required heating to defeat the small amount of red loctite, but the last one, of course the last one, was soaked in loctite and took considerable work to remove. Using a soldering iron to heat the last bushing...

https://c1.staticflickr.com/5/4283/35237929502_25e2314e57_c.jpg

[TC215]

I swore I'd never have another Baer after terrible experiences with my first two, but I've always wanted a TRS, and these pics aren't helping.

[41magfan]

http://imagizer.imageshack.us/v2/640x480q90/923/zurg6b.jpg (https://imageshack.com/i/pnzurg6bj)

[SecondsCount]

I swore I'd never have another Baer after terrible experiences with my first two, but I've always wanted a TRS, and these pics aren't helping.

I would really like to hear your Baer issues in a new thread.

[TC215]

I would really like to hear your Baer issues in a new thread.

I try not to complain too much on open forums, but I'll send you a PM.

[StraitR]

https://c1.staticflickr.com/5/4279/35490721685_c82751bb37_c.jpg

[Drang]

Big brother, little brother.
17526
(ETA: I have no idea how I acquired a pair of left-handed 1911s... Replaced with a pic of the correct side, facing the right direction. Except that, through the magic of the Internet, the old pic is still at the bottom of the post. Anybody got a 6 year old I can borrow to teach me how to use this thing...?)
With their cousins:
17525
(The wife's Star BKM second from bottom. She had her heart set on a PD ! but naturally the month before she made her decision the local supply dried up. I think she's better of with a 9mm, and infinitely better of with her P320. The Star's not a bad gun, but it's old, and there are pretty much no replacement parts.)

[pistolwrench]

http://i190.photobucket.com/albums/z228/pistolwrench19/2017Palmer/PF.jpg~original

http://i190.photobucket.com/albums/z228/pistolwrench19/2017Palmer/PF4.jpg~original

[StraitR]

https://c1.staticflickr.com/5/4236/35339911122_b84249099f_c.jpg

[Nephrology]

https://c1.staticflickr.com/5/4236/35339911122_b84249099f_c.jpg

I see a pair of needle drivers.

[StraitR]

I see a pair of needle drivers.

Wife is an RN. Hemostats are awesome, and so handy. I bought a variety of shapes and sizes from Amazon a few years back. Used that pair to gently hold a stubborn standoff while removing the screw.

[MGW]

http://i190.photobucket.com/albums/z228/pistolwrench19/2017Palmer/PF.jpg~original

http://i190.photobucket.com/albums/z228/pistolwrench19/2017Palmer/PF4.jpg~original

I like that a lot. Did you modify a flat trigger or is that your own design?

[pistolwrench]

I modified a Harrison trigger.

[JAD]

When I think Chuck Rogers, I think flat trigger and golf ball. The man owns his aesthetic.

[MichaelS.]

http://i24.photobucket.com/albums/c31/saxismyaxe/Arms/IMG_20170607_054306_104_zpsmmgxritc.jpg (http://s24.photobucket.com/user/saxismyaxe/media/Arms/IMG_20170607_054306_104_zpsmmgxritc.jpg.html)

[MSparks909]

Two of my favorites...Elite 2 I found NIB earlier this year and my CQB-E I had Wilson option to my specs. Both shoot great but I obviously have a huge soft spot for my Wilson.

17610

[StraitR]

https://c1.staticflickr.com/5/4279/35520749876_b347c37eb8_c.jpg

[theJanitor]

Jim Ryan sent me my Watson Specials last week. I have to say that I am very impressed by the workmanship of these rigs (commander not shown). He accommodated some special requests and was a pleasure to deal with.

Bravo, Jim.

http://i.imgur.com/aPNlaz4.jpg?1

[StraitR]

Looks really nice brother. Looking forward to seeing the Commander version.

ETA: Pic

https://c1.staticflickr.com/5/4240/35521310796_ca7e706f77_c.jpg

[LockedBreech]

Two of my favorites...Elite 2 I found NIB earlier this year and my CQB-E I had Wilson option to my specs. Both shoot great but I obviously have a huge soft spot for my Wilson.

17610

You ever need to move that Elite II, do me a favor and PM me first. O_O


Sent from my iPhone using Tapatalk

[jwperry]

Today is the first day I've regretted selling all my ETM-V mags. https://uploads.tapatalk-cdn.com/20170627/97a674f5d72000d037eb2c9dd1fdf3d5.jpghttps://uploads.tapatalk-cdn.com/20170627/df15aaf16692c427b333da3f6fa8eaac.jpg

Sent from my SAMSUNG-SGH-I537 using Tapatalk

[SeriousStudent]

Jim Ryan sent me my Watson Specials last week. I have to say that I am very impressed by the workmanship of these rigs (commander not shown). He accommodated some special requests and was a pleasure to deal with.

Bravo, Jim.

http://i.imgur.com/aPNlaz4.jpg?1

I love Jim's work as well. Absolutely worth the time and cost involved.

It's like going to London and getting bespoke tailoring. The fit is perfection. :)

[StraitR]

Today is the first day I've regretted selling all my ETM-V mags. -

Didn't waste any time I see. haha. Looking good.

[Matt O]

Decided I needed another 1911 and hoping to perhaps dabble in some single stack in my impending post-grad school life.

17626

[StraitR]

Well done, Matt.

[Drang]

That's because while the attached images aren't embedded in your post (with the [ tags), it was still attached to the post. To delete the actual attachment, click Go Advanced while editing and scoill down to the Attachments section under Additional Options and click on the Manage Attachments button.


[ATTACH=CONFIG]17625

Also, I deleted the unused attachment so it no longer shows in your post (and why only two show in the above screenshot).
Thanks.
I think you ran me through that before, but I forgot how to do it. :o

[StraitR]

https://c1.staticflickr.com/5/4215/35404104532_b46e9b80dc_b.jpg

[JAD]

Nice gun, but somebody vandalized your cap.

[Dagga Boy]

Steve Morrison-MARS Armament BBQ THUG

[DamonL]

I would carry that. I am sure you have a matching carved leather holster to match that.

[45dotACP]

That's one sexy blaster there DB.

Sent from my XT1585 using Tapatalk

[Dagga Boy]

I would carry that. I am sure you have a matching carved leather holster to match that.

[JAD]

Did you just get that? Were you the one blocking my queue?

[theJanitor]

the trigger pad is a nice touch, DB

[GunRacer]

17706 17707 Any 2011 love?

[Dagga Boy]

Did you just get that? Were you the one blocking my queue?

I always seem to have several guns in line at MARS. I got that a while back, just was on a P-F vacation. I have another cool Commander that Steve is working on now. Real Retro cool former Chicago PD "back up" gun. Even got a Thad Rybka Rhodesian holster for it.....totally retro awesome.

[StraitR]

https://farm5.staticflickr.com/4068/34844896793_6cfef02b46_b.jpg

[dsa]

17706 17707 Any 2011 love?

Those are some cool slide serrations. Who built it?

[GunRacer]

Thanks! It was built by Derek at Millennium Custom. He's an outstanding gunsmith-- great attention to detail. It flat out runs too!

17733

[SSGN_Doc]

http://i1309.photobucket.com/albums/s630/SSGN_Doc/image_zpszwshb7uk.jpg (http://s1309.photobucket.com/user/SSGN_Doc/media/image_zpszwshb7uk.jpg.html)

[NorthernHeat]

I have another cool Commander that Steve is working on now. Real Retro cool former Chicago PD "back up" gun. Even got a Thad Rybka Rhodesian holster for it.....totally retro awesome.

Very glad it went to a good home, can't wait to see it when it's finished!

[StraitR]

https://farm5.staticflickr.com/4240/35275031140_2d1ca0d281_c.jpg

[StraitR]

https://farm5.staticflickr.com/4088/35539600901_0970c770af_c.jpg

[TC215]

https://farm5.staticflickr.com/4240/35275031140_2d1ca0d281_c.jpg

You're killin me. Mine was kitted on May 11th. I'm hoping it will be here soon.

[StraitR]

You're killin me. Mine was kitted on May 11th. I'm hoping it will be here soon.

If it makes you feel any better, I sold that CQB-E to friend last year. Was digging through my flickr today and found the pic. I'm told I'm in the will to get it back though. :cool:

[CCT125US]

Friend dropped this off to have me verify POI. He said it was impacting low, but my results were polar opposite. At 10 yds I was an inch high, at 18 yds 1-3/4, and 45 yds on a steel plate, I was about 4 inches high. On the 7" plate I went 3/3 and was holding level sights at the bottom edge. Very interesting gun from Novak's shop. Doing some Googling, it has the "answer" one piece backstrap installed, which eliminates the grip safety. Talk about kicking a hornet' s nest.......
17767
17768
17769

[StraitR]

Freedom carry, because 'Murica, and we can. Happy Independence Day PF.


https://farm5.staticflickr.com/4013/35546036712_62854100c4_c.jpg

[Greg]

17810

[jwperry]

A little bit of Americana for July 4th.

JRCHolsters CDA AIWB II
[@Tony Mayer] AWIB 1911 mag pouch
#NHCustom (https://pistol-forum.com/usertag.php?do=list&action=hash&hash=NHCustom)
#Surefire (https://pistol-forum.com/usertag.php?do=list&action=hash&hash=Surefire)
#Benchmade (https://pistol-forum.com/usertag.php?do=list&action=hash&hash=Benchmade) Osborne

17816

[Gray222]

Not a 1911 guy in any way shape or form, but I love freedom and if Sig ever makes an airsoft version of this pistol I'd buy one in a heartbeat.

https://www.sportsmansoutdoorsuperstore.com/products2.cfm/ID/195949/1911t45wtp/sig-sauer-1911-45-acp-we-the-people-special-edition-pistol

https://www.sportsmansoutdoorsuperstore.com/prodimages/39085-DEFAULT-l.jpghttps://www.sportsmansoutdoorsuperstore.com/prodimages/alt_images/Sig-1911-We-The-People2.jpg

[StraitR]

The other I took today, because pic thread.
https://farm5.staticflickr.com/4289/35585173251_0f28b18805_c.jpg

[spinmove_]

I just realized how much of a communist bastard I am for not owning a 1911 to be able to shoot on the 4th. I'll have to rectify that as soon as I can.

Totally loving the 1911 pics on the 4th though!


Sent from mah smertfone using tapathingy

[SecondsCount]

The other I took today, because pic thread.

Like X 10!

[Greg]

Black Walnut grips from Woodcaliber.com arrived today. Really impressed with them, extremely quick shipping, and packaging was outstanding.
https://c1.staticflickr.com/5/4214/34884160480_1b5ba67a7a_c.jpg

I can't say enough good things about Woodcaliber.com. The grips fit the frame & plunger tube correctly. The screw holes and mag release are perfectly located. The checkering is sharp and clean - great product and vendor.

[Gary1911A1]

17832

My daily carry 1911.

[LockedBreech]

Blurred my face, but here's how I repped my filthy-from-shooting Colt O1091: with bacon and a red napkin for the apple pie fresh from the oven matching my blue and white shirt.

Normally I rock thick cut bacon from a local butcher in plain white paper, but I figured the packaged stuff would photograph better.

Merica.https://uploads.tapatalk-cdn.com/20170705/b140e5859bf5f7f539a59bf11151d0d8.jpg


Sent from my iPhone using Tapatalk

[StraitR]

^^^^^ That is definitely 'Murica right there. haha. Well done.



I can't say enough good things about Woodcaliber.com. The grips fit the frame & plunger tube correctly. The screw holes and mag release are perfectly located. The checkering is sharp and clean - great product and vendor.

I couldn't agree more with every word you said. Fit and finish are excellent, and I was surprised how sharp the checkering is. Outstanding quality at a downright cheap price relative to many other wood stock's I looked at before purchasing. I'll also note that I placed my order in the evening shortly after 9pm EST, and received tracking information email just before 9am the next morning.

[Greg]

17890

My tweaked Colt Wiley Clapp. Gun flat-out runs.

[StraitR]

My tweaked Colt Wiley Clapp. Gun flat-out runs.

That's nice Greg, and no big surprise on it running. Happens more than people like to believe.

I see the Wilson BP TS and rear 10-8 sight, but what else have you done to it? Looks like maybe a Wilson BP mag release?

[Greg]

That's nice Greg, and no big surprise on it running. Happens more than people like to believe.

I see the Wilson BP TS and rear 10-8 sight, but what else have you done to it? Looks like maybe a Wilson BP mag release?

You're right on the first 2. That's the OEM Colt mag release. Not too many mods - mostly to suit preferences rather than needs.

EGW custom bushing, Wilson BP ejector, Colt arched MS Housing, normal bushings and screws. The Colt extractor hook was dressed and a bit more tension was added. (as a reloader I like my brass to land in the same spot :cool:)

I did use a few Harrison parts: Medium trigger (my new favorite), Oversized firing pin stop, Stainless hammer and TR Sear.

[LockedBreech]

That's nice Greg, and no big surprise on it running. Happens more than people like to believe.

I see the Wilson BP TS and rear 10-8 sight, but what else have you done to it? Looks like maybe a Wilson BP mag release?

My Colt running 500-600 over 4-5 range trips, 4 different types of ammo, out of the box without being cleaned or lubricated, has totally changed my perception of 1911s after years of forum reading. I get that's not a huge number by P-F standards but it's better than my P226 .40 or M&P .40 did. I think I've made this post a billion times, but it still makes me happy that a good one seems to run as well as anything else. And they shoot so. Darn. Well.


Sent from my iPhone using Tapatalk

[MGW]

This one is gone.
https://uploads.tapatalk-cdn.com/20170707/d410c8960324409535a83ac42b333692.jpg

Replaced by this one.

https://uploads.tapatalk-cdn.com/20170707/348f99cc44a5a570f1002a4e52839a7c.jpg

Older Loaded. Looks pretty new. Surprised how accurate it is. Trigger isn't great but isn't horrible either. I see it as a blank slate right now. Not sure what direction I want to go yet. Probably send it off for some tuning and then shoot it for awhile and see what happens.

[LockedBreech]

I realize the answer to this is sorta evident since you traded it, but how'd you like the Sig 1911?

[ranger]

17913

My singlestacks - STI Sentry 45ACP, SA Lightweight Operator 45ACP, SA Range Officer 9mm

[ranger]

17914

My doublestacks - STI frankenpistol 45ACP, ParaOrdnance P16 40S&W, ParaOrdnance P14 45ACP. The P14 was an early model and was built in the beginning of USPSA Limited and the P16 was also an early model as USPSA Limited became dominated by 40. The STI is the most accurate pistol I own with a KART match barrel and Briley bushing in a bushing. The STI is also the ugliest gun I own with a "spray on" finish that has come off over the decades - I choose to leave it as-is and just shoot it.

[MGW]

I realize the answer to this is sorta evident since you traded it, but how'd you like the Sig 1911?

It was okay. Shooting a 9mm 1911 was a lot of fun. I couldn't shoot it very well though. Struggled with accuracy. I really don't think it was all me as other people tested it and struggled too.

I was at the point where I was going to send it to my favorite 1911 smith and spend a bunch of money or cash it in and try something else. I made the mistake of putting a lot of rounds through and full custom with all Nighthawk parts and it was all over for the Sig.

I rediscovered how much fun it is to shoot 45 acp out of an all steel gun. The Loaded dropped into my lap for cheap and I couldn't pass it up. It's fit together really well and easy to shoot accurately.

[LockedBreech]

It was okay. Shooting a 9mm 1911 was a lot of fun. I couldn't shoot it very well though. Struggled with accuracy. I really don't think it was all me as other people tested it and struggled too.

I was at the point where I was going to send it to my favorite 1911 smith and spend a bunch of money or cash it in and try something else. I made the mistake of putting a lot of rounds through and full custom with all Nighthawk parts and it was all over for the Sig.

I rediscovered how much fun it is to shoot 45 acp out of an all steel gun. The Loaded dropped into my lap for cheap and I couldn't pass it up. It's fit together really well and easy to shoot accurately.

Totally valid. Loaded is a great base gun for tinkering, or so I read. Dial 'er in!


Sent from my iPhone using Tapatalk

[CSW]

Over the course of my gun adventures, I've owned three Springer loaded guns, all 45acp.
Never an issue, always reliable and accurate.
They're all gone now, replaced by a Kimber Pro CDP II, which has run flawless also.

Very happy that I went to the 9mm Range Officer Champion as another 1911. It too has run flawless with just about all ammunition choices.

[JHC]

Springer LB Operator (freshly cleaned, 835 rds from last cleaning) and the Sams gun.

Kevin B introduced me to the LAPD SWAT qual.

Note two things:

A few wild shots even at those time stds.

And the giant ragged hole is mostly from the shooting from retention muzzle blast. Not from driving slugs that close. Unlike someone else's target. ;)17944

[MGW]

Springer LB Operator (freshly cleaned, 835 rds from last cleaning) and the Sams gun.

Kevin B introduced me to the LAPD SWAT qual.

Note two things:

A few wild shots even at those time stds.

And the giant ragged hole is mostly from the shooting from retention muzzle blast. Not from driving slugs that close. Unlike someone else's target. ;)17944

I put 50 rounds through the Loaded this afternoon. I'm really liking this pistol a lot. Forgot to take pictures today.

[Up1911Fan]

So what is the LAPD SWAT Qual?

[SeriousStudent]

So what is the LAPD SWAT Qual?

Darryl Bolke gave me this. Notice the last sentence about DQ's. Hope this helps.

Modified LAPD SWAT Pistol Qualification Drill

Range: 3 to 25 yds
Target: 8” circle for body; 3x5 card for head.
Start position: concealed or duty retention holster
Rounds fired: 36 or 50

25 yds: 2 body under 4 sec--3x
15 yds: 2 body under 3 sec--3x
10 yds: 2 body then 1 head under 3.5 sec--2x
7 yds: 2 body then 1 head under 3 sec--2x
5 yds: 2 body then 1 head under 2.5 sec--2x
3 yds: 2 body then 1 head under 2 sec--2x

Bonus movement drill if you are not restricted by asinine nanny rules from moving on your range while shooting:
10 yards to 3 yards while on the move: 6 body then 1 head under 5 sec--2x

(Note that this means shooting while actually moving, NOT taking a few shots in a static position before moving, then stopping to take some more shots midway, then making the final shot while stopped at 3 yds—any shots taken while not moving are considered a miss)

This is intended to be shot from the holster. If you must shoot from the ready, as a result of your crappy range’s stupid policies, reduce allowable time by 1 sec for each drill. Any round totally off the target is an automatic DQ (ie. 100% hits required to pass).

[StraitR]

This page needs pics.

https://farm5.staticflickr.com/4235/35442283530_8756f9c7ca_c.jpg

[jwperry]

New grips. https://uploads.tapatalk-cdn.com/20170712/54702554f2b39e6af43d0ef908ed8286.jpg

Sent from my SAMSUNG-SGH-I537 using Tapatalk

[newyork]

http://i.imgur.com/qZ6EUXa.jpg

http://i.imgur.com/XbYSbtt.jpg

Garthwaite sent this back. He originally did the work and I had him finish her up. Arrived today.

[Greg]

Garthwaite sent this back. He originally did the work and I had him finish her up. Arrived today.

OK, I STILL like it. :cool:

[newyork]

Haha! Thanks Greg!

[StraitR]

Garthwaite sent this back. He originally did the work and I had him finish her up. Arrived today.

Jim does great work. The Janitor told me you got this back today, and I've been chomping at the bit to see it. haha Looks fantastic!!

[newyork]

I'll post up some more pics when I can. I barely had time to even touch her yesterday.

[45dotACP]

http://i.imgur.com/qZ6EUXa.jpg

http://i.imgur.com/XbYSbtt.jpg

Garthwaite sent this back. He originally did the work and I had him finish her up. Arrived today.
Ermahgerd that's just beautiful!

Sent from my XT1585 using Tapatalk

[newyork]

http://i.imgur.com/F7daFoj.jpg

[theJanitor]

newyork Sorcery. Jim's bluing tanks are filled with magic

[Paladin]

Oh my gosh now there are 2 of you! Between The Janitor and now newyork ill never be able to sleep again because my dreams are going to be filled with Garthwaite Colt goodness! Gentlemen you have truly set the bar well done!
Rick

[newyork]

Only one way to fix that Rick. Come on. Ya know you want to. Jim has a fast turn around which is good and bad. Good because you want that thing NOW and bad because you have to come up with the money in a hurry.

[Paladin]

Newyork I called and his wife answered and said he was booked up but I'm gonna call back Monday and beg and plead, wish me luck!
Rick

[newyork]

I'm pretty sure that when he closes his books it's not for very long. I remember he closed them last year I believe and they were reopened when I sent mine back in in April.

[newyork]

http://i.imgur.com/7ReciOS.jpg

[newyork]

http://i.imgur.com/1Fq26cq.jpg

[Paladin]

Okay The Janitor and NewYork feel free to send me a personal message including a donation because I'm on the list! And I hold you both responsible:-) ! I am super excited I'm going to have him build a colt commander in 9mm for me. So can both of you continue posting pics to hold me over! Also any recommendations for the build as I've never done a custom before.
Rick

[newyork]

Okay The Janitor and NewYork feel free to send me a personal message including a donation because I'm on the list! And I hold you both responsible:-) ! I am super excited I'm going to have him build a colt commander in 9mm for me. So can both of you continue posting pics to hold me over! Also any recommendations for the build as I've never done a custom before.
Rick

I'm just an amateur at this. theJanitor taught me everything. I used to only buy semi customs years ago. This is my first real custom I had built. The other one I owned I bought used from theJanitor.

I'm dead broke now so seeing your 9mm built will make me just as envious. That is going to be one hell of a build. I can't wait to see it. I'll continue the pics here. Feel free to PM for any questions about the build specifics.

http://i.imgur.com/4DrGDRa.jpg

http://i.imgur.com/LSCU1ZC.jpg

[StraitR]

I'll never get tired of seeing that ^^^^ pistol, ever.

Yeah, theJanitor has done the same for (to?) me, that is, inspiring me to move out of semi-customs into customs. That's not in the cards just yet, as I've spent nearly 7k on two semi-customs in the last 10 months already. That said, I'm also on Jim's list and my slot should be coming up relatively soon. When I got on his list early in the year, I planned on sending him my TRS to make it a one of a kind. I'm not sure if I'll actually send it off at this point, as it's my understanding he's more interested in doing full house builds than fluffing right now. When my number is up, I'll have a conversation with him about it.

Looking forward to hearing more about this 9mm Commander build.

[theJanitor]

Paladin :cool:

http://i.imgur.com/VajshUp.jpg?1

[StraitR]

Damn you people!

[Matt O]

Christ almighty people. Have some sympathy on those of us 1911 appreciators with more plebian salaries. :cool:

[Robinson]

Next thing you know theJanitor will post a picture of a Pachmayr Combat Special and put us all over the edge.

[StraitR]

Next thing you know theJanitor will post a picture of a Pachmayr Combat Special and put us all over the edge.

In 3...2...1...

ETA: Well, until he shows up with better pics, here is one to wet your whistle...


At the range today. It don't get much better than this: Hoag Mastergrade Longslide, Hoag Mastergrade Gov't, Pachmayr Combat Special.

https://farm6.staticflickr.com/5585/14891556587_2a8ba83f74_c.jpg

[newyork]

Pretty sure theJanitor's very close friend either has a Combat Special or a homage to one.

StraitR, a Trs and another semi is a helluva year.

As far as salaries go, I make squat. I had a little money from selling things a few years ago and did a semi retro build. Then I sent it back for the rest of the work a couple years later. So the money was split up.

This is my only 1911. No way I can afford another for years to come.

http://i.imgur.com/3tDP0On.jpg

[CSW]

I've posted this old girl before, but it's as custom as I get:

18285

She started life as a 1918 'black army' M1911, that was an NRA purchase by someone somewhere.
Sometime in the 1970's it was hardchromed, and made into a bullseye gun that shoots 185 grain lead like a guided missile. she rattles, is loose, but she'll stay the same.

[Robinson]

In 3...2...1...

ETA: Well, until he shows up with better pics, here is one to wet your whistle...

I had to say something... :)

Not sure how I missed that before, but thanks.

[StraitR]

Pretty sure theJanitor's very close friend either has a Combat Special or a homage to one.

StraitR, a Trs and another semi is a helluva year.

As far as salaries go, I make squat. I had a little money from selling things a few years ago and did a semi retro build. Then I sent it back for the rest of the work a couple years later. So the money was split up.

This is my only 1911. No way I can afford another for years to come.



Quality over quantity, you're doing it right.

I paid for the first last August by selling years worth of collected, unused guns and a good deal of other stuff in my safe. I decided to move away from SFA AIWB, so I had three glocks and a bunch of support gear to sell as well. I actually sold way more stuff than I needed to, and put the extra towards debt and the family. The TRS was bought outright in April, but I recently sold my Brig Tac which I consider partial late payment. All in all, I'm in the black when it comes to money spent on my 1911's. I would have never bought them otherwise, since excessively expensive gun purchases are pretty much on the bottom of my priorities list.

[45dotACP]

Stahp! I need another 1911 like I need a hole in my head.

Sent from my XT1585 using Tapatalk

[Odin Bravo One]

Hers.

One half of the His/Hers full house custom builds from Chris James at Combat Precision Technologies. Inching ever closer to completion of the matching pair, differing only in caliber.

Can't wait to get these two into the stable.

18290

18289

18288

[Maple Syrup Actual]

Not entirely sure if this belongs here or not...I have it for a bit to do some testing. Interesting. Probably unnecessary. https://uploads.tapatalk-cdn.com/20170721/2086f14f1a4b792a1c0eea76395345e6.jpg

Sent from my SM-N900W8 using Tapatalk

[theJanitor]

My best friend's PCS. Rebuilt by Mike LaRocca and verified to be one of the first 100 made:

http://i.imgur.com/1Dlg9JF.jpg

His 1911's make mine look amateurish.

And I think there's this huge misconception that I have this huge 1911 collection. I've actually divested myself of alot of them over the past couple years for not insignificant money. I started moving them a bit before I had my vision issues one year ago. Since then, I haven't really been able to shoot, and I've spent what little gun budget I have on my 4 year old. I have the requisite couple of glocks and a nice AR, so 1911's are Passion-of-the-Gun guns. But I'd spend every last dime on making memories with him and the wife over any of this stuff.

That being said, I do have two colt on gunbroker.....

[breakingtime91]

So if I wanted to do a heirloom gun for my boy, who would is end it to? Thinking series 80 Colt (plan on carrying it to give it meaning) and feel more comfortable with the series 80 for appendix. This is a few years down the road because I'm experimenting with glock for the foreseeable future so I have time to save. Thanks all.

[Robinson]

So if I wanted to do a heirloom gun for my boy, who would is end it to? Thinking series 80 Colt (plan on carrying it to give it meaning) and feel more comfortable with the series 80 for appendix. This is a few years down the road because I'm experimenting with glock for the foreseeable future so I have time to save. Thanks all.

If it was my gun and I wanted a classic-style build I would probably send it to one of the following:

Heirloom Precision (Jason Burton)
John Harrison
Evolution Armory

Evolution Armory is still making a name for themselves so may be more affordable but they do nice work.

The Colt Custom Shop does great work but they take a long time and are not currently taking new orders.

[Robinson]

My best friend's PCS. Rebuilt by Mike LaRocca and verified to be one of the first 100 made:

Man there is just something about those guns that really appeals to me. Deep blue over hard chrome is a great look for a classic 1911. Thanks for posting!

[Robinson]

Hers.

One half of the His/Hers full house custom builds from Chris James at Combat Precision Technologies. Inching ever closer to completion of the matching pair, differing only in caliber.

Can't wait to get these two into the stable.

Looking great Mr. Smith. :)

Chris James is really building his brand and his own style. I like that rear sight too.

[theJanitor]

breakingtime, if you're planning on some of these makers, get on their list now. they MIGHT call you in three years. Also, It's good to have the base gun already in hand. SOme of them want the gun now, even though they won't touch it for awhile. and some might surprise you with a call, and say, "I'm ready, where's your pistol?"

Robinson's list is good. Selecting your smith takes work and research, but most of the big names will do you right.

ETA: Evolution is doing stellar work right now.

[Wondering Beard]

This could lead to arguments :-), but for what you seem to be asking for, you're talking about a gunsmith where "if you have to ask the price, you can't afford it". Ok, I'm exagerrating but it can feel that way when you see the final price.

Jim Garthwaite (http://www.garthwaite.com/)

Jason Burton at the appropriately named Heirloom Precision (http://www.heirloomprecision.com/)

John Harrison (http://www.harrisoncustom.com/)

Chuck Rogers if you may want something that doesn't necessarily follow the classic lines but is just as wonderful (http://www.rogersprecision.com/)

Stan Chen (http://www.chencustom.com/6naosc1ggzr1twquz9pmdk3vwymz6c)

Ned Christiensen for something that won't be like any other 1911 out there (http://www.m-guns.com/). Somewhere on this site I posted photos of a railed 1911 I have, that he created essentially.

Check their gallery page to see what their style is like since none of them interpret the work (at least esthetically) the same way.

[breakingtime91]

breakingtime, if you're planning on some of these makers, get on their list now. they MIGHT call you in three years. Also, It's good to have the base gun already in hand. SOme of them want the gun now, even though they won't touch it for awhile. and some might surprise you with a call, and say, "I'm ready, where's your pistol?"

Robinson's list is good. Selecting your smith takes work and research, but most of the big names will do you right.

ETA: Evolution is doing stellar work right now.

I may pm you later if that is alright. I have some things I inherited to list for sale and a p2000sk to sell before I can even start to look into a smith. Kind of exciting just to think of it though.

[Odin Bravo One]

My 1911 Smith's:

Vickers
Yam
Morrison
James
Burton
Chen

I'm sure I'm forgetting one or two, and some of the list have done several guns for me, like MARS and CPT (5/4 respectively).

If you're looking for custom, do what you gotta do to make it happen. Current price on the his/hers is in excess of $7k each. Inflation is real. Also why I pay for all work up front.........

[newyork]

Man I'd love to see that collection. Wow.

Who is CPT by the way?

Combat Precision I'm guessing

[Odin Bravo One]

They're posted in a pic somewhere in this thread....

[El Cid]

Let's try this again since the previous hoster is extorting everyone.

https://i.imgur.com/vZrJ9sj.jpg

[newyork]

http://i.imgur.com/95afcio.jpg

[newyork]

http://i.imgur.com/ifdPGru.jpg

[Soxfan9]

18355

[Soxfan9]

https://uploads.tapatalk-cdn.com/20170726/871d252e2049fa5e1d08f4079713c037.jpg

[StraitR]

We all have our opinions, and while I love 1911's in all shapes, sizes and coatings, there's just nothing better to me than a blued Govt model.

[Soxfan9]

We all have our opinions, and while I love 1911's in all shapes, sizes and coatings, there's just nothing better to me than a blued Govt model.
Agree. This one is a '61. Love the bluing on these old Colts. Wish I could have my truck blued :D
18441

[Jay585]

Agree. This one is a '61. Love the bluing on these old Colts. Wish I could have my truck blued :D

For some reason I had an image of you washing your blued truck with hoppes #9.

[Paladin]

18451184491845018448

[Greg]

Agree. This one is a '61. Love the bluing on these old Colts. Wish I could have my truck blued :D
18441

Beautiful!

[Paladin]

theJanitor and newyork I've got my base colt commander ordered and it should arrive Monday or Tuesday.
Rick

[newyork]

Woohoo!!!

[Paladin]

Woohoo!!! now the hard part waiting for him to say send it and then more waiting for completion and patience is something I need to work on.
Rick

[newyork]

The wait is brutal. Not gonna lie.

[newyork]

http://i.imgur.com/BVp4YNH.jpg

[Greg]

18482

This one is from the Colt Custom Shop. My only stainless 1911.

[Paladin]

Just want to give a public thank you for all of the great advice on upcoming build with Garthwaite! Thejanitor you rock thank you sir!
Rick

[Soxfan9]

https://uploads.tapatalk-cdn.com/20170729/fdeaae6e6717902486b0a3c44aeca426.jpg
Love this pistol except for the tiny sights.

[Paladin]

18501
We all have our opinions, and while I love 1911's in all shapes, sizes and coatings, there's just nothing better to me than a blued Govt model.
The only blued one I have until my Garthwaite is complete but it will be a commander so I'll have one of each.
Rick

[StraitR]

The only blued one I have until my Garthwaite is complete but it will be a commander so I'll have one of each.
Rick

That's a sweet Wilson. I was just telling theJanitor the other day that I wish Wilson offered their wood grips without medallions. They sure do make some nice looking grips, and I would have happily put a set on my TRS.

Don't get me wrong, your Garthwaite commander will be ultra drool worthy. haha. Blued Government models just tickle my fancy the most, speaking purely about aesthetics. I carry a Commander(ish) daily myself, and it's not even blued. I carry it constantly and like not worrying about the armor-tuff finish. Just doesn't look as nice as blueing, but probably more forgiving here in the thick Florida humidity for a daily driver.

[Sherman A. House DDS]

Not entirely sure if this belongs here or not...I have it for a bit to do some testing. Interesting. Probably unnecessary. https://uploads.tapatalk-cdn.com/20170721/2086f14f1a4b792a1c0eea76395345e6.jpg

Sent from my SM-N900W8 using Tapatalk

WHATS THE STORY ON THIS? Looks similar to the old Safari Arms 1911's.


Sent from my iPhone using Tapatalk

[Hambo]

Not entirely sure if this belongs here or not...I have it for a bit to do some testing. Interesting. Probably unnecessary. https://uploads.tapatalk-cdn.com/20170721/2086f14f1a4b792a1c0eea76395345e6.jpg

Sent from my SM-N900W8 using Tapatalk

Because JMB's design didn't have enough parts to suit Ze Germans. :rolleyes:

[Eli]

Quick range trip yesterday morning after work.

http://i.imgur.com/s6PMksA.jpg

http://i.imgur.com/aJBiAk2.jpg

The Premier II has about 600 rounds on it. So far it has ran like a top. It even passed the 10-8 Test, which is the first "factory" 1911 that I've had that's been able to do that.

[newyork]

Damn it those Baers are so beautiful. Want one so bad.

[Robinson]

18482

This one is from the Colt Custom Shop. My only stainless 1911.

Very nice, and tastefully done.

[Maple Syrup Actual]

WHATS THE STORY ON THIS? Looks similar to the old Safari Arms 1911's.


Sent from my iPhone using Tapatalk

It's one of those Korth PTS roller-delayed blowback sort-of 1911s.

It's interesting, and in my opinion perfect for anyone who would spend big money on an anvil provided it had an ingenious electrohydraulic system to ensure that the flat surface of the anvil could be pivoted to replicate a rounded surface, thereby making the inclusion of a rounded surface unnecessary, the only downside being that it needs seven special service tools, but that's not a big deal because you can have the manufacturer of the anvil complete the annual service at their own facility in Skwarhedde.

If that sounds like an awesome upgrade to a blacksmith's anvil to you, definitely get the Korth.

[newyork]

http://i.imgur.com/lsteZio.jpg

[Sherman A. House DDS]

It's one of those Korth PTS roller-delayed blowback sort-of 1911s.

It's interesting, and in my opinion perfect for anyone who would spend big money on an anvil provided it had an ingenious electrohydraulic system to ensure that the flat surface of the anvil could be pivoted to replicate a rounded surface, thereby making the inclusion of a rounded surface unnecessary, the only downside being that it needs seven special service tools, but that's not a big deal because you can have the manufacturer of the anvil complete the annual service at their own facility in Skwarhedde.

If that sounds like an awesome upgrade to a blacksmith's anvil to you, definitely get the Korth.

You had me at, "electrohydraulic," which just so happens to be my favorite kind of hydraulics.


Sent from my iPhone using Tapatalk

[Jay585]

http://i.imgur.com/lsteZio.jpg

I'm really looking forward to getting my holster from 5SL. Ordered one of his elephant hide wallets to go with it.

Been waiting since December-ish.

Soon...

[newyork]

Mine was like 9 months. Brutal wait lol

[TC215]

This came in today. I ordered it in early May. Partially inspired by one of StraitR 's guns.

Wilson Combat Lightweight Commander

- 9mm
- black slide, FDE frame
- naked slide
- ball cuts
- fluted chamber
- flush cut, reverse crown barrel
- serrated top of slide
- square notch rear sight, tritium front
- roundbutt magwell
- wide thumb safety

http://i.imgur.com/E4aGYlS.jpg

http://i.imgur.com/vty5Duh.jpg

[Paladin]

TC215 that's a good lookin commander I love mine and in 9mm it's truly amazing fun. I carry mine in the either the SME or the CDA2 everyday!
Rick

[newyork]

Love that piece. Damn!

[newyork]

This came in today. I ordered it in early May. Partially inspired by one of StraitR 's guns.

Wilson Combat Lightweight Commander

- 9mm
- black slide, FDE frame
- naked slide
- ball cuts
- fluted chamber
- flush cut, reverse crown barrel
- serrated top of slide
- square notch rear sight, tritium front
- roundbutt magwell
- wide thumb safety

http://i.imgur.com/E4aGYlS.jpg

http://i.imgur.com/vty5Duh.jpg

Let us know how she shoots.

[StraitR]

This came in today. I ordered it in early May. Partially inspired by one of @StraitR (https://pistol-forum.com/member.php?u=3620) 's guns.

Wilson Combat Lightweight Commander

- 9mm
- black slide, FDE frame
- naked slide
- ball cuts
- fluted chamber
- flush cut, reverse crown barrel
- serrated top of slide
- square notch rear sight, tritium front
- roundbutt magwell
- wide thumb safety



Great build, and love the naked slide. As much as I like the shooting characteristics of the 4" bull barrel, the traditional commander definitely looks better, IMO.

Looking forward to your range report. It's going to be a stellar carry piece. I still happily carry my CCP daily.

[Paladin]

18566
Well there it is all oiled up to go back in the blue box to sit in the safe until I hear from Mr. Garthwaite. Man this is gonna be hard!
Rick

[Paladin]

18567
Of course in typical colt style the slide rattles and the trigger is gritty but the barrel fitment isn't bad but it definitely isn't even in the same league as my Wilson commander, I can't wait for Mr. Garthwaite to work his greatness into this pistol!
Rick

[Drang]

http://i.imgur.com/E4aGYlS.jpg

I was trying to figure out what kind of weird trigger or trigger guard mod you had there, then I realized it was the "C" in "Wilson Combat"... :o
I do not need a custom 1911, I do not need a custom 1911, I do not need...

[Paladin]

18579

[TC215]

Took it to the range this afternoon. I shot 150 rounds of 124 grain FMJ, and 50 rounds of 124 grain HST. Accuracy, function, etc. were all what you'd expect from Wilson. Easy and fun to shoot.

I did have a failure to feed in the second magazine of HST. I'm nearly positive it was from my thumbs rubbing against the slide too much during recoil, but it was frustrating regardless. It didn't happen anymore after that one time.

I normally like Straight 8-style sights, but this one has a plain black rear and a tritium front. That combination seems very fast, and I'll probably stick with it.

http://i.imgur.com/FCKIvTk.jpg

I've spent the last year dedicated to the Glock 19 for both on and off duty, for a variety of reasons. However, I've been thinking about switching back to the 1911, mainly because I'm required by policy to carry a railed 1911 for SWAT, and I don't particularly like switching back between the two. So, after I get enough rounds through this one, I'll probably end up carrying it for my normal, plainclothes on-duty work and off-duty.

[newyork]

Paladin that is going to be so damn sick.
TC I love that Wilson.

So jealous of the 9mm commanders.

[Duckysattva]

Just picked this up last week, '77 built (best I can tell from serials, haven't sent to Colt) Series 70 9mm Government Model. Planning on sending it off to have it vintage custom'd and get her in good running order.

18602

Only two small issues with the gun that bug me a little but I'm hoping they can be cleaned up by a smith. One is a reassembly scratch that was pre-existing and the other is below. The slide stop notch is a little rough on both sides, more so toward the rear of the slide. There's some gouging/deformation there that I'm hoping isn't too significant to repair or re-cut and blend back to match the rest of the slide. Looks like it's from it being put into slide lock with a weak mag spring and poor engagement to the slide. Frustrating because this thing is in pretty damn good shape otherwise.

18601

[JFK]

Two Baers

https://farm5.staticflickr.com/4313/35900726500_fc213b4a11_c.jpg

[StraitR]

ETA: ^^^^^ Those look fantastic!!!!



Just picked this up last week, '77 built (best I can tell from serials, haven't sent to Colt) Series 70 9mm Government Model. Planning on sending it off to have it vintage custom'd and get her in good running order.


Only two small issues with the gun that bug me a little but I'm hoping they can be cleaned up by a smith. One is a reassembly scratch that was pre-existing and the other is below. The slide stop notch is a little rough on both sides, more so toward the rear of the slide. There's some gouging/deformation there that I'm hoping isn't too significant to repair or re-cut and blend back to match the rest of the slide. Looks like it's from it being put into slide lock with a weak mag spring and poor engagement to the slide. Frustrating because this thing is in pretty damn good shape otherwise.



Great pick up. Proofhouse.com is a very reliable source for Colt serial number data.

As far as fixing your two issues, anything can be fixed, it's merely a matter of money.

[Greg]

18739

1974 Govt Model w/ Buffalo bone grips

[CSW]

You guys are killing me.
Best I did was put a set of desert Ergo's on the range officer

[Jason Burton]

.... The slide stop notch is a little rough on both sides, more so toward the rear of the slide. There's some gouging/deformation there that I'm hoping isn't too significant to repair or re-cut and blend back to match the rest of the slide.

Looks totally fixable from here... people might be surprised at how many Colts of that era need the slide stop notch re-cut.

[Amp]

One of my Novak blasters. Built by the late Joe Bonar on a Wilson Combat frame and slide. One of the last pistols built by Joe before his untimely death. I swapped out the Novak sights for a set of Trijicon HDs.

18826

[JHC]

I just got this Combat Operator back from Dave Sams today. Work performed:

Install/fit KKM 1:32 ramped barrel
Install/fit NM barrel bushing
Install short Greider trigger
Ed Brown magwell, blend with frame
Slide/frame fit/lap
Engrave SCG logo under pistol grip on frame
Tightened loose plunger tube
Grip screw bushings not flush inside magwell - flush cut

Check out the 50 yard test target, 10 shots from a machine rest.

18924

[theJanitor]

Oh, man. The Bonar and Sams' guns are awesome

[MGW]

I just got this Combat Operator back from Dave Sams today. Work performed:

Install/fit KKM 1:32 ramped barrel
Install/fit NM barrel bushing
Install short Greider trigger
Ed Brown magwell, blend with frame
Slide/frame fit/lap
Engrave SCG logo under pistol grip on frame
Tightened loose plunger tube
Grip screw bushings not flush inside magwell - flush cut

Check out the 50 yard test target, 10 shots from a machine rest.

18924

I'll have one of those some day. Are those stock sights?

[JHC]

I'll have one of those some day. Are those stock sights?

Omigerd yes! I dawdled on deciding on sights and suddenly, he was done. So he came up with the plan to check POI on a B8 at 25 yds. If it was too far off he'd measure and mill down a correct front. So last Friday driving home from work he called me to tell me we lucked out. 25 yard POI with a 6:00 hold was all shots in the B8 X ring. I was like, get me a Powerball!
He then was waiting awhile for the sun to get lower before checking 50 yard results. Waat? That is how he is about everything.

[45dotACP]

I just got this Combat Operator back from Dave Sams today. Work performed:

Install/fit KKM 1:32 ramped barrel
Install/fit NM barrel bushing
Install short Greider trigger
Ed Brown magwell, blend with frame
Slide/frame fit/lap
Engrave SCG logo under pistol grip on frame
Tightened loose plunger tube
Grip screw bushings not flush inside magwell - flush cut

Check out the 50 yard test target, 10 shots from a machine rest.

18924That gun tho...

Sent from my XT1585 using Tapatalk

[Greg]

19205

Me trying to get artistic and shit before coffee...

[Greg]

19208

[El Cid]

This is why fiber optic sights are not duty/defensive worthy. Lol! Only 527 rounds through the gun. I don't carry it so it's not a big deal.

https://i.imgur.com/Mei0cly.jpg

[Robinson]

Greg, That's a really nice looking Colt.

[SecondsCount]

This is why fiber optic sights are not duty/defensive worthy. Lol! Only 527 rounds through the gun. I don't carry it so it's not a big deal.


Even if you lose the fiber, you still have a front sight ;)

[El Cid]

Even if you lose the fiber, you still have a front sight ;)

Lol! True. But it's like going back in time to old school sights. Only my eyes are not going back to where they used to be.

[Greg]

Novak's and 10-8 fiber front sights look like they'd protect the tube a little better. If I really wanted an FO front it might be worth looking into.

[CSW]

I use the 10 - 8 sights on my carry Walther 99.
The front sight is built very well and seems that it would resist abuse.

[Artemas2]

At only 500 some rounds I would wonder about either rod quality or installation error. My ameriglo fiber sight has over 10,000 rounds and still going and that sight leaves the rod almost completely exposed. My 10-8 performance fiber guns are about half that round count and no issues.

[M2CattleCo]

Definitely an installation error or a bad piece of rod.

I've had fiber rods go for years of very high volume shooting on USPSA guns.

The key is to melt it in right.

Put the rod through the sight.

I take a fingernail file and square up the end of the rod, maybe not necessary, but I have good results. I think it makes the rod form a stronger ball when you melt it.

Melt the end of the rod, but don't let the flame touch the rod. When you have a little ball on the rod, gently pull it into the recess. This makes a perfect fit and helps to hold the rod securely.

Cut the other end about 1/16" from the sight. File the end square.

Melt the rod again with indirect heat. When the rod melts it should pull itself tight in the sight. This can a take a little trial and error to gt the cut length just right, not all fibers melt/shrink the same.

When the rod is tight in the recessed hole on the serrated side, and pulled tight across the span of the sight, it's not going anywhere for a loong time.

10-8 makes the best fiber optic front IMO. It's longer than most and uses a bigger rod. They also have a rib in the middle to protect the rod. Great sights.

[CDFIII]

When a guy wants to make a trade for his 1911 for two HK P2000's and a Gen. 5 19.. Do it!
19532
Like new maybe 250rds fired Wilson Combat SS CQB vintage 2011. Oh and my new Strider DB in CPM 3V showed up today as well.

[Bucky]

I really need an updated pic, but for now.

http://www.pollardfamily.net/al/gameguns1.jpg

[Odin Bravo One]

Combat Precision Technologies built his/hers matched set. Hers in 9mm, his in .45; both come with fitted threaded barrels as well, because Shhhhhhh! Suppressors.

As much as I enjoy watching a Colt or Springfield turned into functional art, there is something truly special about guns built from scratch by a master craftsman.

Thanks Chris James!!


https://youtu.be/WEdH_GfNSsM

[Serpico1985]

So it was as you who ordered up that set. Congrats, looks like a killer combo.

[Odin Bravo One]

Now I'm down to waiting on two.....a Jason Burton Heirloom Precision series 70 9mm Commander, and a Stan Chen full house custom.

I will say I've become more patient in my old age, but at the same time, I'm looking forward to not having any guns in the shop.

[Gun Mutt]

19663

1997 Kimber Custom Classic that I carried to Thunder Ranch back in 1998. (Took a G19, too, of course.) In 2001 I had Robar change out any MIM parts, new springs and coated with NP3. Heinie Ledge sights, VZ G10 grips and an S&A magwell ride on it today. I genuinely don't know the round count of this pistol as it was a loaner in my little tribe that has been to several pistol classes and countless matches in that role. It's mainly a safe queen these days as pretty much anyone I know that's worth talking to runs a Glock these days. ;)

19664