Originally Posted by
AzShooter
Thanks. Lots of modifications to this gun. The biggest is an Apex Tactical Mass Drive Hammer which is supposed to let the Double Action trigger pull down to around 6.5 pounds. It works with some ammo but not all so my trigger is a bit heavier at 8 pounds 6 ounces and will fire just about anything.
All of the internal parts have been stoned. There is a Powers Custom extended firing pin and a Hogue extended safety. The grips are either Hogue Big Butt wood or the same grip in rubber with the finger grooves sanded off to fit my hand better.
Forcing Cone is cut to 11 degrees and the muzzle has been crowned.
The springs are Jerry Miculek spring kit with an extended 8/32 set screw to get the pull I want. I also use a 12 pound rebound spring.
That's about it.