My next upgrades
Rear trac bar
https://www.thurenfabrication.com/co...00-power-wagon
Steering dampener
https://www.thurenfabrication.com/co...2500-2014-2022
I’m probably going to air bag my rear to help out with towing since I went with the Thuren soft rear springs/fox 2.0 rear suspension kit. I had little too much sag on the last run to the deer lease, when Tx DPS flashes the brights at ya your kinda running nose up.
After that I’ll probably be done unless I hit the power ball and go beast mode with super charger and King Dominator 3” reservoir shocks and weld on relocation mounts.
Ultimate goal is to get a Black Series Q17/Q19/Q21 for some off road trips and deer lease in comfort.
I went with a viair on board air compressor kit that’s a constant duty system 45 min on/use duty cycle. I mounted the pump to the passenger side frame rail with welded on studs to make sure it was secure and the tank is mounted via threaded nut serts to the body pan under the passenger front door with the air line ran into the bed and connection/chuck right under the right side loop tie down for protection. I wanted everything tucked out of the way a somewhat protected from sight/impact damage.
I’m still really liking the retrax pro bed cover and bed rack/platform I put together. Everything has stayed secure loaded down with 15 gallons (three 5 gallon fuel jugs and carrier) of fuel, 37” spare tire, shovel and fire extinguisher. I want to mount some track boards and a off road jack to it as well but haven’t found exactly how or what products to purchase yet. Inside the bed I use a back pack loaded with air lines, ARB tire repair kit and straps hooked onto the top right tie down hooks.
I’m not sure if I’m going to do lights and bumpers, just haven’t found anything that isn’t too mall warrior with enough protection and actually will take a good hit.
Sent from my iPhone using Tapatalk