Glock 17 problems W/Gen2 fresh back from Glock
I have a Gen 2 Glock 17 that I sent to Glock because it was ejecting cases in my face at times. This was after I tried having various knowledgeable Glock Armoerers try to fix it.
I sent the Gun to Glock with a note detailing the issues. I got it back with a note saying: Inspected, Replaced Parts, Meets Factory Specs, Tested OK."
Well, it still bops me in the head with brass every so often, so my solution is to make sure to wear a peaked cap even when shooting indoors--should be common sense on my part, right?
But worst of all, it has a disturbing new problem that it never had before--occasional failures to extract where the rim of the case is barely sticking out of the chamber and the new round from the magazine and the new round from the magazine gets caught trying to feed because the empty case has not extracted. This ocurred with the same magazine with two different brands of ammunition--Winchester Ranger 124 grain +P JHP and some of the Winchester White box 9mm Nato 124 grain FMJ. I fired about 200 rounds throguh the gun and had the failures to extract twice with the above-mentioned ammo. I don't know if they put a new extractor in the gun--but I don't think so since it does not have the loaded chamber indicator.
Any thoughts on this?
thanks